33
●
Camera Patrol Learning
There are two ways of setting the camera patrol learning.
One is to use the setup menu and the other is to operate
the camera.
Follow the procedures described below to set the camera
patrol learning up while operating the combination camera.
1. Press the
PATROL LEARN
button while holding down
the
PROGRAM
button.
[LEARNING] appears on the monitor.
Note:
Pressing the PROGRAM button alone for 2 sec-
onds will change the screen to the WV-CU161C
SETUP MENU or camera SETUP MENU.
2. Operate the camera using the following controls so that
it traces the routine course that is the most frequently
patrolled. The learning is programmed for 30 seconds.
• Pan/Tilt (Joystick)
• Iris (Open/Close)
• Focus (Near/Far)
• Zoom (Tele/Wide)
• Preset position
Note:
The memorized parameters may differ somewhat
depending on the camera type. Refer to the manual
included with the camera.
3. To stop the learning, press the
PATROL STOP
button
while holding down the
PROGRAM
button.
[LEARNING] appears on the monitor.
LEARNING
B/W
AUTO
PATROL STOP
CAMERA
SETUP
SETUP
PROGRAM
●
Camera Preset Position
There are two ways of presetting camera positions. One is
to use the setup menu of the combination camera and the
other is to operate the camera.
Follow the procedures described below to set up the cam-
era preset position while operating the combination cam-
era.
1. Move the camera to the position you wish to preset
using the joystick.
Adjust the picture using the following controls.
• Iris (Open/Close)
• Focus (Near/Far)
• Zoom (Tele/Wide)
Note:
The memorized parameters may differ somewhat
depending on the camera type. Refer to the manual
included with the camera.
2. Type a number with the numeric buttons for the preset
position. The typed number appears in the CAMERA
section of the LED display.
3. Press the
PRESET/SET/PROGRAM PRESET
button
while holding down the
CAMERA SETUP/SETUP/PRO-
GRAM
button.
The position and its number are memorized for future
recall.
UP
L
R
DOWN
1
2
3
4
6
7
8
9
0
5
PROGRAM
PRESET
ESC
HOME
SET
PRESET
PROGRAM
PRESET
SET
PRESET
CAMERA
SETUP
SETUP
PROGRAM
PATROL
PLAY
PATROL LEARN
CAMERA
SETUP
SETUP
PROGRAM
