26
CAMERA CONTROL FUNCTIONS
Camera control functions are operable.
It is necessary to set up the camera before using the cam-
era control functions. For further information, refer to the
Operating Instructions for the respective combination cam-
era (See page 33). You can also set it up from the Camera
Setup menu during operating the system.
■
Pan/Tilt Control
A combination camera or an ordinary camera with pan/tilt
head can be controlled.
Move the pan/tilt head in the desired direction using the
joystick.
To move the pan/tilt head slowly, move the joystick while
holding down the
SLOW/CAMERA FUNCTION
button.
Note:
The SLOW/CAMERA FUNCTION button only works in
combination with cameras or pan/tilt heads that are pro-
vided with more than 8-step speeds.
OPERATING PROCEDURES
■
Lens Control
A motorized lens can be controlled.
1. Press the
FOCUS NEAR
or
FOCUS FAR
button to
adjust the lens focus while watching the monitor.
If you are using a camera with an auto focus feature,
then the lens focus can be automatically adjusted by
simultaneously pressing the
FOCUS NEAR
and
FOCUS FAR
buttons.
2. Press the
ZOOM TELE
button to zoom in on the object
or press the
ZOOM WIDE
button to zoom out from the
scene.
The focal length differs depending on the lens installed
on the camera.
3. Press the
SHIFT
button.
4. Press the
ZOOM/IRIS
buttons to adjust the lens iris
while watching the monitor.
If the
IRIS CLOSE
and
IRIS OPEN
buttons are simulta-
neously pressed for approximately 1 second or more,
then the iris is reset to the default values.
NEAR
FAR
FOCUS
AUTO FOCUS
WIDE
TELE
IRIS
ZOOM
CLOSE
OPEN
IRIS RESET
SHIFT
WIDE
TELE
IRIS
ZOOM
CLOSE
OPEN
IRIS RESET
Joystick
