■
System Setup
1. Display the WV-CU161C SETUP MENU.
2. Select SYSTEM SETUP by moving the joystick up or
down.
3. Press the PRESET/SET/PROGRAM PRESET button.
The SYSTEM SETUP menu appears on the monitor.
Cable Compensation Setting
This item lets you select a compensation level to match to
transmission loss caused by cable extension.
1. Display the SYSTEM SETUP menu.
2. Select CABLE COMP by moving the joystick up or
down.
3. Select the most appropriate cable length by moving the
joystick to the right or left.
The initial factory setting is S.
S:
Less than 400 m (1 300 ft)
M:
400 m (1 300 ft) to 700 m (2 300 ft)
L:
700 m (2 300 ft) to 900 m (3 000 ft)
(When using RG-59U, BELDEN 9259 or equivalent
cable)
Switch Buzzer Setting
This item lets you select whether or not to sound the switch
buzzer when a button is pressed.
1. Display the SYSTEM SETUP menu.
2. Select SWITCH BUZZER by moving the joystick up or
down.
3. Select the ON or OFF mode by moving the joystick to
the right or left.
The initial factory setting is ON.
22
■
Preset Data Loading
The data settings preset to the camera are downloaded to
the controller. A set of preset data can be given a title by
the controller operation. The preset data with the title can
be uploaded to other cameras.
1. Display the WV-CU161C SETUP MENU.
2. Select PRESET DATA LOAD
by moving the joystick
up or down.
3. Press the PRESET/SET/PROGRAM PRESET button.
The PRESET DATA LOAD screen appears on the moni-
tor as shown below.
P
:
Data saved.
■
:
No Data saved. (The factory default setting for all
cameras from CAM1 to CAM8 is
■
.)
Downloading
1. Display the PRESET DATA LOAD menu.
2. Select a camera number between CAM1 and CAM8 by
moving the joystick up or down.
3. Press the PRESET/SET/PROGRAM PRESET button.
The camera number and download menu appear on
the monitor as shown below.
4. Select DOWN LOAD by moving the joystick up or down.
5. Press the PRESET/SET/PROGRAM PRESET button.
Downloading starts.
SYSTEM SETUP
CABLE COMP S
SWITCH BUZZER ON
PRESET DATA LOAD
CAM1:
CAM2:
CAM3:
CAM4:
CAM5:
CAM6:
CAM7:
CAM8:
CAM1:
DOWN LOAD
UP LOAD
DATA TITLE
CAM1:
DOWN LOAD
UP LOAD
DATA TITLE
END
LOADING
Blinking
