[Reboot]
Click the [Execute] button to reboot the camera. It is impossible to operate the camera for about 2 minutes
after rebooting the camera.
Note
•
To initialize the network settings (
®
page 111), turn off the power of the camera, then turn on the power
again while holding down the [INITIAL SET] button on the unit for about 5 seconds. Wait about 3
minutes after releasing the button. The camera will start up and the settings including the network
settings will be initialized. Do not turn off the power of the unit about 3 minutes just after turning on the
power.
SW155
SW152
:
•
The notification function allows users to provide the notification of the error to the specified destination
mail address and an original alarm destination when an error such as no SD memory card insertion
after the reboot or a locked SD memory card insertion occurs. (
®
page 94, page 95)
Operating Instructions
153
19 Maintenance of the camera [Maintenance]
