[Time adjustment]
Select the time adjustment method from the following. Time adjusted by the selected method will be used as
the standard time of the camera.
•
Manual:
Time set on the [Basic] tab on the “Basic” page will be used as the standard time of the camera.
•
Synchronization with NTP server:
Time automatically adjusted by synchronizing with the NTP server
will be used as the standard time of the camera.
•
Default:
Manual
[NTP server address setting]
When “Synchronization with NTP server” is selected for “Time adjustment”, select the method of how to obtain
the NTP server address from the following.
•
Auto:
Obtains the NTP server address from the DHCP server.
•
Manual:
The NTP server address will be entered manually on “NTP server address”.
•
Default:
Manual
IMPORTANT
•
When obtaining the NTP server address from the DHCP server, it is necessary to select “DHCP” or
“Auto” for “Network Settings” on the [Network] tab of the “Network” page. (
®
page 111)
[NTP server address]
When “Manual” is selected for “NTP server address setting”, enter the IP address or the host name of the NTP
server.
•
Available number of characters:
1 - 128 characters
•
Default:
None (blank)
IMPORTANT
•
When entering the host name for “NTP server address”, it is necessary to configure the DNS settings
on the [Network] tab of the “Network” page. (
®
page 111)
[NTP port]
Enter a port number of the NTP server.
•
Available port number:
1 - 65535
•
Default:
123
The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 110, 161, 162, 443, 554, 995, 10669, 10670, 59000-61000
[Time adjustment interval]
Select an interval (1 - 24 hours: in 1 hour intervals) of synchronization with the NTP server.
•
Default:
1h
[Time zone]
Select a time zone corresponding to the location where the camera is in use.
•
Default:
(GMT) Greenwich Mean Time: Dublin, Edinburgh, Lisbon, London
110
Operating Instructions
16 Configure the settings of the servers [Server]