![background image](http://html1.mh-extra.com/html/panasonic/wv-sfn480pj/wv-sfn480pj_operating-instructions-manual_4194910112.webp)
4.
Click the [Set] button.
→
This unit is updated with the setting contents. Click the [Delete] button corresponding to the area to be
deleted.
5.
Click the [Confirm] button.
→
The image (“H.264(1)” or “H.264(2)”) that the [Confirm] button was pressed for is displayed. When a
window is newly opened and about 3 seconds pass, the currently outputted bit rate can be confirmed
with the configured VIQS.
IMPORTANT
•
No setting contents are determined unless the [Set] button is clicked.
•
To check the image after configuring VIQS, display an H.264 image on the “Live” page, or press the
[Confirm] button under “Stream”.
•
The outputted bit rate changes depending on the subject. Confirm the bit rates with actual subjects
used when operating the camera.
112
Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]
Содержание WV-SFN480PJ
