![background image](http://html1.mh-extra.com/html/panasonic/wv-sfn480pj/wv-sfn480pj_operating-instructions-manual_4194910129.webp)
Select an action to be taken when a terminal alarm 1 is detected from the following.
•
Off:
Does not take any action even when a terminal alarm 1 is detected.
•
(Quad PTZ) [1-4]/[5-8]/[9-12]/[13-16]:
When using Quad PTZ, all of the 4 screens move to their preset
positions.
•
(Single PTZ) 1-16:
If a previously registered preset position is selected, when a terminal alarm 1 is
detected, the camera will move to that position.
•
Default:
Off
[Terminal alarm 2]
Select an action to be taken when a terminal alarm 2 is detected from the following.
•
Off:
Does not take any action even when a terminal alarm 2 is detected.
•
(Quad PTZ) [1-4]/[5-8]/[9-12]/[13-16]:
When using Quad PTZ, all of the 4 screens move to their preset
positions.
•
(Single PTZ) 1-16:
If a previously registered preset position is selected, when a terminal alarm 2 is
detected, the camera will move to that position.
•
Default:
Off
[Terminal alarm 3]
Select an action to be taken when a terminal alarm 3 is detected from the following.
•
Off:
Does not take any action even when a terminal alarm 3 is detected.
•
(Quad PTZ) [1-4]/[5-8]/[9-12]/[13-16]:
When using Quad PTZ, all of the 4 screens move to their preset
positions.
•
(Single PTZ) 1-16:
If a previously registered preset position is selected, when a terminal alarm 3 is
detected, the camera will move to that position.
•
Default:
Off
[VMD alarm]
Select an action to be taken when a VMD alarm is detected from the following.
•
Off:
Does not take any action even when a VMD alarm is detected.
•
(Quad PTZ) [1-4]/[5-8]/[9-12]/[13-16]:
When using Quad PTZ, all of the 4 screens move to their preset
positions.
•
(Single PTZ) 1-16:
If a previously registered preset position is selected, when a VMD alarm is detected,
the camera will move to that position.
•
Default:
Off
[Command alarm]
Select an action to be taken when a command alarm is detected from the following.
•
Off:
Does not take any action even when a command alarm is detected.
•
(Quad PTZ) [1-4]/[5-8]/[9-12]/[13-16]:
When using Quad PTZ, all of the 4 screens move to their preset
positions.
•
(Single PTZ) 1-16:
If a previously registered preset position is selected, when a command alarm is
detected, the camera will move to that position.
•
Default:
Off
13.5 Configure the VMD settings [VMD area]
Click the [VMD area] tab on the “Alarm” page. (
®
The video motion detection areas can be set on this page.
Up to 4 areas can be set. When motion is detected in the set area, it will be regarded as an alarm.
IMPORTANT
•
The alarm occurrence indication button (
®
page 19) will be displayed when motion is detected by the
VMD function.
•
The alarm occurrence indication button will be displayed when receiving an alarm input of a terminal
alarm or a command alarm.
Operating Instructions
129
13 Configure the alarm settings [Alarm]
Содержание WV-SFN480PJ
