![background image](http://html1.mh-extra.com/html/panasonic/wv-sfn480pj/wv-sfn480pj_operating-instructions-manual_4194910114.webp)
[Mic select]
SF N
4 8 0
“Mic select” can only be configured when “Mic input”, “Interactive(Half-duplex)”, or “Interactive(Full-duplex)” is
selected for “Audio transmission/reception”.
•
Internal:
The camera’s built-in mic is used.
•
External:
Uses the audio inputted from the mic or the line input terminal. An audio cable (accessory) must
be connected to the audio cable connector.
•
Default:
Internal
[Audio encoding format]
Select the audio reception encoding format from G.726, G.711, and AAC-LC.
•
Default:
G.726
Note
•
G.711 is available only when “Mic input” is selected for “Audio transmission/reception”.
•
G.726 is always applied for the audio transmission encoding format.
•
AAC-LC is used for mic audio saved on SD memory cards. The default bit rate setting is 64kbps. After
selecting AAC-LC, the specified bit rate setting will be used.
[Audio bit rate]
Select the audio bit rate used to transmit/receive audio data.
–
When “G.726” is selected for “Audio encoding format”: 16kbps/32kbps
–
When “G.711” is selected for “Audio encoding format”: cannot be selected
–
When “AAC-LC” is selected for “Audio encoding format”: 64kbps/96kbps/128kbps
•
Default:
32kbps
[Mic input volume (Camera to PC)]
Select a volume level on the PC to hear audio transmitted from the camera.
•
Mic High:
The volume level will become high. This setting will be applied when audio is input to the camera
using a microphone.
•
Mic Middle:
The volume level will become middle. This setting will be applied when audio is input to the
camera using a microphone.
•
Mic Low:
The volume level will become low. This setting will be applied when audio is input to the camera
using a microphone.
•
Line High:
The volume level will become high. This setting will be applied when audio is input to the camera
using the Line input.
•
Line Middle:
The volume level will become middle. This setting will be applied when audio is input to the
camera using the Line input.
•
Line Low:
The volume level will become low. This setting will be applied when audio is input to the camera
using the Line input.
•
Default:
Mic Middle
Note
•
These settings are linked with the volume settings of the “Audio recording” function.
•
When “Internal” is selected for “Mic select”, “Line High”, “Line Middle”, and “Line Low” cannot be
selected.
114
Operating Instructions
11 Configure the settings relating to images and audio [Image/Audio]
Содержание WV-SFN480PJ
