![background image](http://html1.mh-extra.com/html/panasonic/wv-sfn480pj/wv-sfn480pj_operating-instructions-manual_4194910131.webp)
[VMD image type]
When the “Image capture mode” type is “2 Monitor”, select the image that will specify the VMD area.
When “8M F Panorama” or “4M F Panorama” is selected for “Image capture mode”:
–
Fisheye:
Specifies the VMD area with Fisheye images.
–
Panorama:
Specifies the VMD area with Panorama images.
When “8M F Double Panorama” or “4M F Double Panorama” is selected for “Image
capture mode”:
–
Fisheye:
Specifies the VMD area with Fisheye images.
–
Double panorama:
Specifies the VMD area with Double Panorama images.
When “8M F Quad PTZ” or “4M F Quad PTZ” is selected for “Image capture mode”:
–
Fisheye:
Specifies the VMD area with Fisheye images.
–
Quad PTZ:
Specifies the VMD area with Quad PTZ images.
•
Default:
Fisheye
IMPORTANT
•
Changes to “VMD image type” are immediately applied.
•
Areas are deleted when the “VMD image type” settings are changed. In this case, reconfigure the areas.
[Area]
When selecting a VMD area in the screen, it will be numbered as area 1. (Subsequent areas will be numbered
in the order of selection.)
[All areas] button
When the [All areas] button is clicked, the whole area will become the VMD area, and “1(White)” will be
automatically applied to “Area”.
Note
•
When Double Panorama is used, “1(White)” and “3(Green)” are configured for “Area”.
•
When Quad PTZ is used, “1(White)” to “4(Red)” are configured for “Area”.
[Status]
Select “On” or “Off” to determine whether or not to perform video motion detection.
•
On:
Performs video motion detection.
•
Off:
Does not perform video motion detection.
•
Default:
Off
[Detection area]
Adjust the size of the VMD area using the slider. The smaller the selected value is, the higher the sensitivity
of VMD area becomes. The current value (1-10) will be displayed on the right of the slider.
•
Default:
1
[Detection sensitivity]
Adjust the sensitivity of motion detection in the VMD area using the slider. The settings can be configured for
each area individually. The larger the value is set, the higher the sensitivity level becomes.
The current value (1 (low) - 15 (high)) will be displayed below the slider.
•
Default:
8
[Delete] button
Click the [Delete] button corresponding to the area to be deleted. The outline of the selected area will be
deleted.
Operating Instructions
131
13 Configure the alarm settings [Alarm]
Содержание WV-SFN480PJ
