21
Installing the camera directly on the ceiling or wall
Place the installation template label (accessory) on the ceiling or wall, and make a hole to pass the
cable.
Remove the template label, and mount the camera by fixing 4 screws (locally procured).
(
☞
Page 29)
20 mm {13/16 inches}
83.5 mm {3-5/16 inches}
Cable access hole for ceiling/wall
Recommended screw (M4: 4 pcs.)
Side cable access hole
Direction marker for installation
Screws
(locally procured)
Installation template label (accessory)
46 mm
{1-13/16 inches}
40 mm {1-9/16 inches}
Using the optional ceiling mount bracket WV-Q174
SF539
SF538
It is possible to reduce the exposed portion of the
camera body using the optional ceiling mount
bracket. Refer to WV-Q174 Operating Instructions
or "Installation" (
☞
page 29) for how to mount the
camera.
Using the optional ceiling mount bracket WV-Q105 (E models only)
Refer to WV-Q105 Operating Instructions and "Installation" (
☞
page 29) for how to mount the cam-
era in case of using the optional ceiling mount bracket.
Anchor bolt
Safety wire angle
(WV-Q105 supplied)
Roof space
Safety wire
(WV-Q105 supplied)
Camera
WV-Q105 (option)
Fixing screw
(4 pcs., WV-Q105 supplied)
Cable tie (accessory)
Ceiling board such
as plaster board
