17
Detaching the dome cover
z
Loosen the dome cover fixing screws using
the bit for tamperproof screw (accessory).
Note:
• The dome cover and the camera are joint
-
ed with an assist wire. Do not remove the
assist wire.
Detach the dome cover from the camera by loosening the dome cover fixing screws.
SF549
SF548
The following procedure is required when using WV-SF549 or WV-SF548. Refer to page 18 when
using WV-SF539 or WV-SF538.
IMPORTANT:
• Remove the cover film from the dome section of the dome cover after the installation is com
-
plete. Do not touch the dome section by hand directly after removing the cover film.
Dome cover fixing screw