14
Major operating controls
About the initial set button
After turning off the power of the camera, turn on the power of the camera while holding down this
button, and wait for around 5 seconds or more without releasing this button. Wait around 2 minutes
after releasing the button. The camera will start up and the settings including the network settings
will be initialized. Do not turn off the power of the camera during the process of initialization. Before
initializing the settings, it is recommended to write down the settings in advance.
Enclosure
Dome cover
Lens
Built-in
microphone
Initial set button
Link indicator
(lit when linking)
Access indicator
(lit when accessing)
Network cable
SD memory card
error indicator
(lit when data
cannot be saved)
SD memory card slot
<Front view>
<Rear view>
