Panasonic WV-NS202 - i-Pro Network Camera Скачать руководство пользователя | Manualshive

Страница: 55 / 90

background image

55

Configure the settings relating to the alarm image

Click the [Alarm] tab on the "Alarm setup" page. (

☞

pages 20 and 21: How to display/operate the setup menu)

■

Alarm image setup

The settings relating to the alarm image to be transmitted to an FTP server can be configured in this section. The
alarm image will be transmitted to an FTP server. To transmit alarm images to an FTP server, it is necessary to con-
figure the settings in advance. (

☞

page 66)

Refer to pages 52, 53 and 56 for further information about the settings relating to the alarm, the camera action at an
alarm occurrence and the alarm output terminal.

Important:

• Depending on the network line speed or the network traffic, images may not be transmitted at the exact designat-

ed interval or period.

• When "Alarm input" or "Manual" is selected for "Save trigger" on the [SD memory card] tab, images will not be

transmitted to the FTP server even when an alarm is detected. (

☞

page 27)

[To FTP setup]

When "To FTP setup" is clicked, the [FTP] tab of the
"Server setup" page will be displayed. (

☞

page 66)

[Alarm image FTP transmission]

Select "ON" or "OFF" to determine whether or not to
transmit the alarm image to the FTP server.

Default:

OFF

[Directory]

Enter the directory name where the alarm images are to
be saved.
For example, enter "/ALARM" to designate the directory
"ALARM" under the root directory of the FTP server.

Number of characters for the directory name:

1 - 256

characters

[File name]

Enter the file name used for the alarm image to be
transmitted to an FTP server. The file name will be as
follows.

File name:

["Entered file name" + "Time and date

(year/month/day/hour/minute/second)"] + "Serial
number"

Number of characters for the file name:

1 - 32 char-

acters

[Post alarm]

• Transmission interval

Select the transmission interval for the alarm image
transmission to the FTP server from the following.
0.1 fps/0.2 fps/0.33 fps/0.5 fps/1 fps

Default:

1 fps

• Number of images

Select the number of images to be transmitted from
the following.
1 pic/2 pics/3 pics/4 pics/5 pics/6 pics/7 pics/8 pics/
9 pics/10 pics/20 pics/ 30 pics/50 pics/100 pics/
200 pics/300 pics/500 pics/1000 pics/2000 pics/
3000 pics/5000 pics

Default:

100 pics

• Recording duration

Approximate time to be taken to save the set "num-
ber of images" with the set "transmission interval"
will be displayed.

[Image capture size]

Select "QVGA" or "VGA" for the image capture size of
images to be transmitted to the FTP server or of an
image to be attached to the alarm mail.

Default:

VGA

«
...
53
54
55
56
57
...
»

Содержание WV-NS202 - i-Pro Network Camera



























































































Отзывы:

Нет отзывов

Похожие инструкции для WV-NS202 - i-Pro Network Camera

Бренд: Larry vs Harry Страницы: 20

EZ Link DAL 150

Бренд: Harman Kardon Страницы: 16

Бренд: IFM Страницы: 9

Multiple G9F18 AU000

Бренд: Genesis Страницы: 3

Бренд: Viking Страницы: 2

Бренд: Dynojet Страницы: 68

Бренд: Kuda-Phonebase Страницы: 3

Бренд: PRAXIS Страницы: 2

Бренд: FORM FIT Страницы: 2

Edge Flush Rail

Бренд: Thule Страницы: 12

Бренд: Edimax Страницы: 11

Presence Sensor Air

Бренд: LOXONE Страницы: 2

Бренд: Yakima Страницы: 12

Бренд: My Child Страницы: 12

Marble + Brass 2743412

Бренд: West Elm Страницы: 3

Бренд: Nippon Gases Страницы: 28

Бренд: Park Tool Страницы: 2

Бренд: Nav TV Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды