![background image](http://html.mh-extra.com/html/panasonic/wv-clr920a/wv-clr920a_operating-instructions-manual_277789018.webp)
-18-
The following adjustment should be made by qualified
service personnel or system installers.
1. Loosen the screw on the side of the camera.
2. Turn the flange-back adjusting ring to the desired
position.
Note:
Adjusting a focus in the visible rays may be
soft-focused with the near-infrared light.
Screw
Flange-back
Adjusting Ring
3. Tighten the screws on the side of the camera.
Caution:
Tightening the screw by force will cause
damage to the screw or deviation of focus.
FOCUS OR FLANGE-BACK ADJUSTMENT