![background image](http://html.mh-extra.com/html/panasonic/wv-clr920a/wv-clr920a_operating-instructions-manual_277789039.webp)
-39-
6. Set the oscilloscope to the horizontal rate and
expand the horizontal sync portion on the oscillo-
scope.
7. Move the cursor to H PHASE.
8. Adjust the horizontal phase by pressing
L
or
M
.
The adjustable range is 0 - 2.0 µs.
6-4. Line-lock Sync Mode (LL)
Note:
The line-lock mode is not applicable when
DC power and/or VD2 synchronization is sup-
plied to the camera.
1. Move the cursor to SYNC and select LL.
2. After confirming that the cursor is on LL, press
I
.
The vertical phase adjustment menu appears on
the monitor.
3. Supply the video output signal of the camera to be
adjusted and the reference camera video output
signal to a dual-trace oscilloscope.
4. Set the oscilloscope to the vertical rate and expand
the vertical sync portion on the oscilloscope.
5. Move the cursor to COARSE. The cursor is high-
lighted.
6. Press
L
or
M
to match the vertical phase for both
video output signals as closely as possible.
(COARSE adjustment can be incremented in 16
steps by 22.5 degrees by pressing
L
or
M
.)
Note:
After the sixteenth step, the adjustment
returns to the first step.
7. Move the cursor to FINE.
8. Press
L
or
M
to match the vertical phase for
both video output signals as closely as possible.
(FINE adjustment can be made up to 22.5 degrees
by pressing
L
or
M
.)
1 (1 - - - 16): 0 degrees
2 (1 - - - 16): 22.5 degrees
16 (1 - - - 16): 337.5 degrees
** SYNC **
V PHASE
COARSE 1(1--16)
FINE I........
- +
RET END