background image

Network Camera

For professional use only Outdoor use

Model No.

 

  

WV-S25700-V2L 

WV-S25600-V2L 

WV-S25500-V3L 

WV-S25500-F6L 

WV-S25500-F3L

Installation Guide

Included Installation Instructions

 

„

Do not insert any foreign objects. 

Fire or electrical shock may be caused if water or any foreign objects, such as metal objects, enter inside the 
unit.
Turn the power off immediately and contact qualified service personnel for service. 

 

„

Do not use this product in an inflammable atmosphere. 

Failure to observe this may cause an explosion resulting in injury. 

 

„

Avoid installing this product in the locations where salt damage occurs or corrosive gas 

is produced.

Otherwise, the mounting portions will deteriorate and injury or accidents due to a fall of the product may occur.

 

„

Do not strike or give a strong shock to this product.

Failure to observe this may cause injury or fire.

 

„

Keep microSD memory cards away from infants and children.

Otherwise, they may swallow the cards by mistake.
In this case, consult a doctor immediately.

 

„

Do not hang down from this product or use this product as a pedestal. 

Failure to observe this may cause injury or accidents. 

 

„

Do not damage the power cable. 

Do not damage, fabricate, twist, stretch, bundle, or forcibly bend the power cable. Do 

not place heavy objects on it, and keep it away from heat sources.

Use of a damaged power cable may cause electric shock, short circuit, or fire.

Consult the dealer for repair.

 

„

Do not install this product on a place that is greatly influenced by wind.

Installation on a place where the wind speed is 60 m/s {approx. 134 mph} or more may cause a fall of the 
product resulting in injury or accidents.

 

„

Do not sprinkle more water, exceeding the performance limit of waterproof with a high 

pressure cleaning machine, etc. 

Fire or electrical shock may be caused by immersion.

 

„

Do not attempt to disassemble or modify this product. 

Disposal of Old Equipment and Batteries

Only for European Union and countries with recycling systems

These symbols on the products, packaging, and/or accompanying documents mean that used 
electrical and electronic products and batteries must not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to 
applicable collection points in accordance with your national legislation.
By disposing of them correctly, you will help to save valuable resources and prevent any potential 
negative effects on human health and the environment.
For more information about collection and recycling, please contact your local authority.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

Note for the battery symbol (bottom symbol)

This symbol might be used in combination with a chemical symbol. In this case it complies with the 
requirement set by the Directive for the chemical involved.

NOTE:

 This equipment has been tested and found to 

comply with the limits for a Class A digital device, 
pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection 
against harmful interference when the equipment is 
operated in a commercial environment. This equip-
ment generates, uses, and can radiate radio frequen-
cy energy and, if not installed and used in accor-
dance with the instruction manual, may cause harm-
ful interference to radio communications.
Operation of this equipment in a residential area is 
likely to cause harmful interference in which case the 
user will be required to correct the interference at his 
own expense.

FCC CAUTION:

 Changes or modifications not 

expressly approved by the party responsible for com-
pliance could void the user’s authority to operate the 
equipment.

Supplier’s Declaration of conformity

Trade name : i-PRO
Model No. :  WV-S25700-V2L / WV-S25600-V2L 

WV-S25500-V3L / WV-S25500-F6L 
WV-S25500-F3L

 Responsible Party : 
i-PRO Americas Inc.
8550 Fallbrook Drive, Suite 200 Houston,
Texas 77064
Support Contact: 1-800-513-5417

For U.S.A.

CAN ICES-3(A)/NMB-3(A)

For Canada

The model number and serial number of this prod-
uct may be found on the surface of the unit.
You should note the model number and serial num-
ber of this unit in the space provided and retain this 
book as a permanent record of your purchase to aid 
identification in the event of theft.
  Model No. 
  Serial No.

For U.S.A.

This device complies with part 15 of the FCC Rules. 
Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, 
and (2) this device must accept any interference 
received, including interference that may cause 
undesired operation.

For U.S.A.

“<Control No.: C****>” used in these documents should be used to search for information on our technical 
information website (https://i-pro.com/global/en/surveillance/training-support/support/technical-information) 
and will guide you to the right information. 

About the user manuals

Product documentation is composed of the following documents.

 

 

Installation Guide (this document): 

Provides information about “Precautions”, 

“Precautions for installation” and the installation method.

  Basic Information (Refer to the link on the following support website): 

Provides 

information about “Precautions for use”

, “Parts and functions”

 and “Detail specifications”.

 Operating Instructions (Refer to the link on the following support website):

 

Explains how to perform the settings and how to operate this camera. 
https://i-pro.com/global/en/surveillance/training-support/documentation-database-list

Méthode 

d’installation

Vis de fixation 

recommandée

La capacité de 

traction minimale 

requise

Montez directement la 
caméra sur la surface 
d'installation à l'aide de 
la plaque de fixation.

M4 × 16 mm
{5/8 pouces}

/ 4 él.*

196 N {44 lbf}

Montez la caméra sur 
la surface d'installation 
à l'aide du support de 
base.

*   La longueur de la vis est un exemple lors de l’installation de la caméra au plafond 

ou sur un mur robuste d’une épaisseur de 20 mm {25/32 pouces} ou plus.

• Before attempting to connect or operate this product, please read these instructions 

carefully and save this manual for future use.

• microSDXC/ microSDHC/ microSD memory card is described as microSD memory card.

• The external appearance and other parts shown in this manual may differ from the actual product within the 

scope that will not interfere with normal use due to improvement of the product.

Precautions

Failure to observe this may cause fire or electric shock. Consult the dealer for the repair or inspections. 

 

„

Do not install or clean the camera, or touch this product, the power cable or the 

connected cables during thunder storms.

Failure to observe this may cause electric shock.

 

„

Refer installation work to the dealer. 

Installation work requires technique and experience. Failure to observe this may cause fire, electric shock, injury, 
or damage to the product. Be sure to consult the dealer. 

 

„

Stop the operation immediately when something is wrong with this product. 

When smoke goes up from the product, the smell of smoke comes from the product, or the exterior of the 
product has deteriorated, continued use will cause a fire or fall of the product resulting in injury, or damage to the 
product. 
In this case, turn the power off immediately and contact qualified service personnel for service.

 

„

Select an installation area that can support the total weight. 

Selecting an inappropriate installation surface may cause this product to fall down or topple over, resulting in 
injury or accidents. Installation work shall be started after sufficient reinforcement. 

 

„

Periodic inspections shall be conducted. 

Rust on the metal parts or screws may cause a fall of the product resulting in injury or accidents. 
Consult the dealer for the inspections. 

 

„

The exclusively designed mount bracket shall be used.

Failure to observe this may cause a drop resulting in injury or accidents.
Use the exclusively designed mount bracket for installation.

 

„

The screws and bolts must be tightened to the specified torque.

Failure to observe this may cause a drop resulting in injury or accidents.

 

„

Turn the power off when do wiring of this product.

Failure to observe this may cause electric shock. In addition, short circuit or wrong wiring may cause fire.

 

„

Install this product in a location high enough to avoid people and objects from bumping 

the product. 

Failure to observe this may cause injury. 

 

„

Do not install this product in locations subject to vibration.

Loosening of mounting screws or bolts may cause a fall of the product resulting in injury or accidents.

 

„

Correctly perform all wiring.

Short circuits in the wiring or incorrect wiring may cause fire or electrical shock.

 

„

Install the product securely on an installation surface in accordance with the installation 

instructions.

Failure to observe this may cause injury or accidents. 

 

„

Do not rub the edges of metal parts with your hand. 

Failure to observe this may cause injury.

 

„

Do not touch the metal part of the bottom side of the product. 

The metal part of the bottom side may become hot while the product is in use. Direct skin contact with high-
temperature parts of the product may cause burns.

 

„

Turn the power off when cleaning this product.

Failure to observe this may cause injury.

WARNING:

• Operation of this product in a residential environment could cause radio interference.

Caution:

Notice:

• The DC power supply connected to the camera 

must be in the same building.

• The network camera is only intended for a 

connection to an ethernet or PoE network 

without routing to the outside plant.

• This product has no power switch. Be sure 

to install disconnect devices such as a circuit 

breaker to shut down the main power of power 

supplying equipment to this product.

• Only connect 12 V DC Class 2 power supply (UL 

1310/CSA 223), limited power source (IEC/EN/UL/

CSA 60950-1, IEC/EN/UL/CSA 62368-1 Annex Q) or IEC/

EN/UL/CSA 62368-1 PS2.

• Before attempting to connect or operate this 

product, please read these instructions carefully.

• This product is not suitable for use in locations 

where children are likely to be present. 

• Do not install this product in locations where 

ordinary persons can easily reach.

• This product is a professional equipment.

•  For information about screws and other parts 

required for installation, refer to the corresponding 

section of this document.

 : Direct current symbol

WV-S25700-V2L

© i-PRO Co., Ltd. 2022

avs0222-2042  

Printed in China

i-PRO Co., Ltd.

Fukuoka, Japan
https://www.i-pro.com/

Authorised Representative in EU:

i-PRO EMEA B.V.

Laarderhoogtweg 25, 1101 EB 

Amsterdam, Netherlands

i-PRO EMEA B.V.  UK Branch

1010 Cambourne Business Park, 

Cambridgeshire CB23 6DP

Reviews: