![background image](http://html.mh-extra.com/html/panasonic/wv-cf284-series/wv-cf284-series_operating-instructions-manual_277755011.webp)
●
Direct mounting
If the camera is directly mounted on a
wall/ceiling, align the camera mounting posi-
tion with the position of the hole through
which the cables run and make the hole.
If no hole is made through a wall/ceiling and
open wiring along a wall/ceiling is used,
process the cover so that the cables can be
run through the side of the cover.
11
Installations and Connections
The following installation should be made by qualified service personnel or system installers.
■
Preparations
Important:
• Procure 4 mounting screws according to the material of the installation area. In this case,
wood screws and nails should not be used.
Recommended tightening torque is as follows:
M4: 1.6 N·m {16 k
g
f·cm}
• Required pull-out capacity of a single screw/bolt is 196 N {20 k
g
f} or more.
• If a ceiling board such as plaster board is too weak to support the total weight, the area
shall be sufficiently reinforced.
• The protection sheet attached to the dome cover should be peeled off after installation.
●
Using a two-gang junction box
When using a two-gang junction box (4" x
4"), procure one locally that meets the
dimensions in the figure.
Next locally procure four camera-mounting
screws suitable for the installation surface
and structure of the wall/ceiling or two-gang
junction box.
Processed section of the side
surface of the cover
Caution:
ONLY CONNECT THIS TO 24 V AC OR 12 V DC CLASS 2 POWER SUPPLY.
Содержание WV-CF284 Series
Страница 126: ...126 附件 使用说明书 本书 1本 以下部件用于安装 外壳固定用螺钉 1只 ...
Страница 127: ...127 在欧盟以外其它国家的废物处置信息 此符号仅在欧盟有效 如果要废弃此产品 请与当地机构或经销商联系 获取正确的废弃方法 ...