Panasonic WV-CF284 Series, Руководство по эксплуатации

Страница: 12 / 128

■
Disassembling the Camera
1. Remove the top cover.
• Adjust the marker on this unit to
"INSERT" on the "DOME COVER" label
on the top cover, and turn the top cover
counterclockwise to remove it.
• The clear dome cover and the inner
dome cover are joined into a single unit.
Therefore, never try to remove them.
●
To mount the camera directly on
the wall/ceiling
1. Prepare the mounting space.
2. Place the camera onto the wall/ceiling
DOME COVER
LOCK ADJUST INSERT
DOME COVER
LOCK ADJUST INSERT
and mark four screw positions with a
pen.
3. Mount the camera onto the wall/ceiling
with 4 screws (procured locally).
4. Fasten all of the mounting screws.
●
To mount the camera on a two-
gang junction box
1. Install the two-gang junction box onto
the wall/ceiling.
2. Mount the camera onto the two-gang
junction box with 4 screws (procured
locally).
3. Fasten all of the mounting screws.
TOP
LOOK
46 mm {1-13/16"}
Camera mounting screw x4
(not supplied)
83.5 mm
{3-5/16"}
12
Mounting Place
Ceiling/wall
Model
(Direct mounting)
Recommended
screw
M4
Number of
screws
4 pcs
Minimum pull-
out strength
196 N {20 k g f}
The mounting requirements are shown as follows.
■
Connections
●
Video output connection
Connect the video output connector to the
monitor, or other system devices, with the
procured coaxial cable.
The maximum extensible cable length is
shown in the table.