77
DP-2330/3030
DEC 2004
Ver. 2.0
DP-2310/3010
4.1.3.
F4 Mode: Input/Output Status Test
Set the machine to service mode and press "4" key on the Keypad.
↓
Press the "START" key.
↓
Enter the number to activate the test then press "START" key.
↓
Press "STOP" key to cancel the test.
↓
When the "C (CLEAR)" key is touched, the selected code input will not be accepted.
↓
Press "FUNCTION" and "C (CLEAR)" keys simultaneously to exit the service mode.
1.
Input Check
F4 Mode (Input Check)
No.
Function
Condition
Message Display
Remarks
7 6 5 4 3 2 1 0
000 Power Supply Fan Signal
Normal.
0
001 LSU Fan Signal
Normal.
0
002 Toner Remaining Sensor
Signal
Toner is detected.
0
003 Paper Feed Module
Detection Sensor
(2nd Paper Feed Module)
Unit is connected.
0
Paper Tray Detection
Sensor
(2nd Paper Tray)
Paper Tray is not
connected.
0
Paper Tray Detection
Sensor
(1st Paper Tray)
Paper Tray is not
connected.
0
Key / Card Counter
Detection Sensor
Counter is not detected.
1
NP Sensor
(Sheet Bypass)
Paper is not detected.
1
Paper Length Sensor
(Sheet Bypass)
Sensor is activated.
0
Size Sensor 2
(Sheet Bypass, Inside)
Sensor is activated.
1
Size Sensor 1
(Sheet Bypass, Outside)
Sensor is activated.
1
Содержание Workio DP-3010
Страница 134: ...134 DP 2330 3030 DEC 2004 Ver 2 0 DP 2310 3010 memo ...
Страница 311: ...311 DP 2330 3030 DEC 2004 Ver 2 0 DP 2310 3010 memo ...
Страница 312: ...E ...