Panasonic Workio DP-1520P Скачать руководство пользователя страница 320

Страница: 320 / 496

320

SEP 2004

Ver. 1.2

DP-1520P/1820P/1820E

7.3.2.

Setting the Default Destination (For Europe and Other Destinations only)

1. Press “V” or ”/\” arrow keys to select the desired destination.
2. Press the "

SET

" key.

3. Press the "

" key for YES.

After the machine has warmed up, it displays:

4. Turn the Power Switch on the Right side of the machine to the

OFF

and back to the

position.

(31) Install the

Toner Waste Container

(32) Close the Front and the Left Covers.
(33) Load paper into the Paper Tray.

Caution:

Ensure that all filament tapes and packing
materials are removed.

(34) Plug the

AC Power Cord

and turn the Power

Switch on the Right Side of the machine to the
ON position.

Note:

Perform the following adjustments after the
machine has warmed up and displays:

<For USA and Canada> (Skip to Sect. 7.3.3.)

<For Europe and Other Destinations only>

Note:

The (**) *** in the LCD display above may differ
depending on the destination.

READY TO COPY

COPIES:001

DP-1820E (**) ***

DESTINATION CODE :

PRESS \/ /\ TO SELECT

READY TO COPY

COPIES:001

Содержание Workio DP-1520P

















































































































































































































































































































































































































































































































Результаты поиска

Содержание Workio DP-1520P

Отзывы:

Похожие инструкции для Workio DP-1520P

Бренды по названию

Популярные бренды

Panasonic Workio DP-1520P, Руководство по обслуживанию

Результаты поиска

Содержание Workio DP-1520P

Отзывы:

Похожие инструкции для Workio DP-1520P

Бренды по названию

Популярные бренды