Panasonic WJRT416 - 16CH DIGITAL RECORDER Скачать руководство пользователя | Manualshive

Страница: 4 / 59

background image

4

Preface

The Monitoring Software is the dedicated software that allows operation and configuration of the settings of
Panasonic WJ-RT416 digital disk recorder (hereinafter referred to as recorders) connected to a network such as a
LAN or the Internet using a PC.
The following models are described as "WJ-RT416" in these operating instructions.

• WJ-RT416K:

No built-in HDD is provided

• WJ-RT416:

Built-in HDD x1

The monitoring software consists of the following.

RT4Client

The principal functions of the monitoring software can be operated using the RT4Client. To use the monitoring soft-
ware, start the RT4Client first.
The following are the functions of the RT4Client.

• Displaying of live images from the cameras (normal display, frame display, sequential display)
• Control of the cameras (setup, operation)
• Playback of recorded images on the recorder
• Configuration of the settings of the recorder
• Operation of the recorder
• Reception of an event occurrence notification from the recorder and displaying of images recorded by the alarm

recording

• Download of recorded images on the recorder
• Download of data from the recorder (log, language file, setup data)
• Upload of data to the recorder (language file, firmware, setup data)
• Remote talk

RT4Viewer

Recorded images downloaded on the HDD of the PC can be played using the RT4Viewer. The RT4Viewer can start
using the interface of the RT4Client.
The functions of the RT4Viewer:

• Playback of downloaded recorded images
• Alteration check of data

About These Operating Instructions

There are 2 sets of operating instructions for the WJ-RT416 as follows.

• Operating Instructions (PDF) of the monitoring software (this document)
• Installation Guide (book)

These "Operating Instructions" contain descriptions of how to configure the required settings to operate the recorder
and descriptions for how to operate the recorder using a PC via a network.
Refer to the "Installation Guide" for descriptions about installation/connection, and descriptions of how to operate the
recorder using the buttons on the front panel of the recorder.
Adobe

®

Reader

®

is required to read these operating instructions (PDF) on the provided CD-ROM. When the Adobe

®

Reader is not installed on the PC, download the latest Adobe

®

Reader from the Adobe web site and install it.

The illustrations of the setup menus in these operating instructions are of the NTSC model.

«
...
2
3
4
5
6
...
»

Содержание WJRT416 - 16CH DIGITAL RECORDER




























































Отзывы:

Нет отзывов

Похожие инструкции для WJRT416 - 16CH DIGITAL RECORDER

Бренд: Ubiquiti Страницы: 56

Бренд: SecurityMan Страницы: 83

RoadRecorder 9000

Бренд: Safety Vision Страницы: 25

Бренд: CCTV Imports Страницы: 74

Бренд: Minox Страницы: 15

Бренд: TORCHVIEW Страницы: 41

Бренд: Techpro Страницы: 225

Microplate Reader

Бренд: Aiwa Страницы: 71

Бренд: Lemona Страницы: 8

Бренд: Sight mark Страницы: 12

Бренд: XVision Страницы: 114

Бренд: Vitek Страницы: 8

Бренд: COP-USA Страницы: 66

Бренд: COP-USA Страницы: 114

Digital Video Recorder

Бренд: COP-USA Страницы: 130

ADR87XXXD Series

Бренд: Avue Страницы: 83

Бренд: Velleman Страницы: 119

Бренд: 2SAN Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды