Unlock the front
entrance door
1
Security preliminary
alarm activates
2
■
Going out
■
Returning home
The security system will not
become active during the security
system delay time.
Lock windows
and doors
1
Arm the security
system
2
A window is opened
3
The security system
triggers an alarm
4
Lock windows and
doors
1
Leave during
the security system
delay time
3
Disarm the security
system
3
The system does not
transition to the security
alarm if the security
preliminary alarm is disarmed
within its effective time.
電源
POWER
警戒
SET
電源
POWER
警戒
SET
解錠
通話
UNLOCK
TALK
復旧/警報音停止
非常
RESET/ STOP
ALARM
EMERG.
FIRE CONFIRM
MENU
OFF
火災
確認
終了
メニュー
電源
POWER
解錠
通話
UNLOCK
TALK
復旧/警報音停止
非常
RESET/ STOP
ALARM
EMERG.
FIRE CONFIRM
MENU
OFF
火災
確認
終了
メニュー
電源
POWER
解錠
通話
UNLOCK
TALK
復旧/警報音停止
非常
RESET/ STOP
ALARM
EMERG.
FIRE CONFIRM
MENU
OFF
火災
確認
終了
メニュー
電源
POWER
Installer
Setting
2
Arm the security
system
Delay settings can be changes as follows if installation settings is set to "Permit changes
to delay setting : Yes". ( Pages 108 to 109)
(Consult with the management company or the company that installed the system.)
Security Alarms
186
187
●
The following table lists the default settings for the security system delay time and the preliminary
alarm time.
The operation manual describes operation per these delay settings.
Windows (Security 1, Security 3,
and Security 4)
Front entrance door (Security 2)
Security system
delay time
Setting
Preliminary
alarm time
0 seconds
(off, immediate)
0 seconds
(off, immediate)
60 seconds
60 seconds
Security system delay time: 0 (off, immediate), 30, 60, 120, and 300 seconds
Preliminary alarm delay time: 0 (off, immediate), 30, 60, 120, and 300 seconds
●
Confirm that system components are properly installed before using the system.
●
The method to arm and disarm the security system varies depending on your condominium
building, installed devices, and device settings. Consult with the management company or the
company that installed the system.
You can configure individual security alarms so that each circuit can be armed and disarmed.
(Consult with the management company or the company that installed the system.)
Security Alarm Operation
Security Operation When Going Out and Returning Home
If the security system is armed after locking doors and windows, the security system triggers an
alarm when a window or door is opened to notify of intrusion. After a specific period of time
elapses, the system reports the alarm to the unit entrance, building manager room, and other
areas outside of the condominium unit.
The security system can accommodate simultaneously up to 4 circuits that can be connected to
windows and doors.
The security system is armed when going out and disarmed when returning home. To accomplish
this, the security system delay time is configured to allow time to leave after the security system
is armed, and the preliminary alarm time is configured to allow time to disarm the system once
the front entrance door is opened.
INTRODUCTION
USUAL USAGE
SETTING ACCORDING TO
YOUR PREFERENCES
OPERATIONS AND MEASURES
WHEN ALARM GOES OFF
SECURITY ALARM SETTING
AND DISARMING
RECORD
MANAGEMENT
OTHER
Note
Installer
Setting
(For base unit)
