復旧/警報音停止
RESET/ STOP ALARM
電源
POWER
警戒
SET
電源
POWER
警戒
SET
電源
POWER
警戒
SET
●
If the entered security number is
correct, the security alarm is disarmed.
After the security disarmed message is
triggered, and the "Security has been
turned off." message appears on the
screen, the Top Menu screen appears.
The Security Setting screen appears
when the "Individual Security System" is
enabled.
●
If the entered security number is
incorrect, the system returns to the
"Enter the security number." screen. If
this happens, repeat the procedure
from Step .
●
The security system rearms after 10
seconds of no operation. If this happens,
repeat the procedure from Step .
●
The Security SET indicator turns off when all
security system circuits are disarmed.
●
The same message that plays from the base
unit also plays from the sub-base unit and
extension speaker if connected.
●
The system can be configured not to play
the message when the security system is
disarmed. A disarming sound (short beeps)
can also be enabled.
( See page 108 for information on the
Security Off Sound.)
(The sound used when arming the security
system is also changed.)
●
The Security Setting screen appears
when the "Individual Security System"
setting is enabled.
Proceed to Step .
●
Proceed to Step if the "Individual
Security System" setting is not enabled.
The security system is disarmed if the
"Individual Security System" setting is not
enabled and no security number has been
configured. Operations from Step are
unnecessary.
MENU button
196
197
●
The entered security number appears.
●
The Top Menu screen appears.
The security system can be disarmed from the Top Menu screen when the security alarm is not active.
●
Operation is different when using Living mode while the "Individual Security System" setting
(installation setting) is enabled.
Touch
1
2
4
5
Press the MENU button while
the security system is armed
Touch
Enter the security number
Security SET
indicator appears
in green
Touch
●
The configured security system
circuit appears.
(Up to 4 security circuits can be
configured.)
3
3
●
The figure illustrates an
example of entering "1234".
Security SET indicator
appears in green
Disarming the Security System
While the Security Alarm is Not Active
4
3
●
The Top Menu screen appears.
●
The Security Setting screen appears
when the "Individual Security System"
setting is enabled.
Touch for the security system
circuit for which you want to
disarm the security system when
the "Individual Security System"
is enabled
●
The "Enter the security number." screen
appears.
●
The security system is disarmed if no
security number has been configured.
Operations from Step are unnecessary.
●
"On" appears under the security circuit
name when the security system is armed.
●
Touch to disarm the security system
for both windows and doors.
does not appear if only the Security 1
circuit is configured.
Touch the
numeric
buttons
Press
Note
Note
Note
Note
INTRODUCTION
USUAL USAGE
SETTING ACCORDING TO
YOUR PREFERENCES
OPERATIONS AND MEASURES
WHEN ALARM GOES OFF
SECURITY ALARM SETTING
AND DISARMING
RECORD
MANAGEMENT
OTHER
The security system cannot be disarmed by switching between the living modes when using Living mode
and the security system setting is set "On" for all modes.
Note
Security SET indicator
appears in green
4
Touch if in the security number is
entered incorrectly. All numbers will be erased.
(For base unit)
Touch
Touch
any one
