8A9 H58 00001 S0415-0AB
Talk
(Base unit)
Security Functions
•
When the door phone slave unit does not have a camera or you talk with the Building Manager Room, the screen turns blue.
Page
23
1
For the security functions, refer to pages 152 to 154 and pages 167 to 177 of the attached operation
manual (CD-ROM).
4
When called from the Main Entrance or Unit Entrance, you hear the call sound, an image of the visitor
appears on the screen, and the caller display flashes. (When called from the Building Manager Room,
the caller display lights up.)
•
After a call, you can talk for approximately
10 seconds without pressing the TALK button.
For this time, the talk light (green) on the call
sub-base unit light up (green)
•
After 10 seconds have elapsed, the system enters
the calling state (talking is cut off), and the talk
lamp (green) on the call sub-base unit will flash.
•
You can talk with the call sub-base unit from
which the response was made.
* Call sub-base units from which no response
was made will enter the standby state.
5
•
The call ends automatically about 1 minute after
it starts.
•
It is possible to end the conversation by
pressing the OFF button.
Internal call
(Base unit)
Press the TALK button
1
Touch displayed on the screen
2
A "Beep" sound will play
3
Simple Guide
For Apartment Building HA D Series
•
The talk lamp turns from flashing to lighting in red.
•
After a beep, the caller display changes to light.
Press the TALK button
Speak into the microphone
2
Conversation automatically ends about 1 minute
from the start.
A call from the Building Manager Room will end
automatically after about 4 minutes.
When the volume is too low (
Page 31)
Touch twice
→
Touch .
Volume is adjusted each time you touch .
3
Note
Press the TALK button
•
A beep is played, the call lamp and the screen
display disappear, and the call ends.
•
It is possible to end the conversation by
pressing the OFF button.
Page
41
When the TALK button on the call
sub-base unit is pressed, you can talk
Press the TALK button on the base unit
or call sub-base unit to end the call
◎
This document is a digest of the attached operation manual (CD-ROM). Refer to the attached
operation manual (CD-ROM) for details. (Example: The notation
Page 23
, means please refer to
page 23 of the attached operation manual (CD-ROM).)
◎
Information on the Apartment Building HA System is available. (As of June, 2015)
http://www2.panasonic.biz/es/densetsu/ha/mansion_ha/index.html
If you do not press the TALK or the OFF
button, sounds in the room will be
overheard.
Base Unit Number VGDT18142WK • VGDT18144WK • VGDT18242WK • VGDT18342WK • VGDT18542WK • VGDT18642WK • VGDT18644WK •
VGDT18742WK • VGDB18142WK • VGDB18144WK • VGDB18542WK • VGDB18642WK • VGDB18644WK
Call Sub-Base Unit Number VGD13113W
Convenient Functions when Talking
Yuttari
Excuse Function
Extension Function
Pretending to Be Out Function
Page
32
You hear slower than the other party actually talks and
easily understand.
Touch twice to display on the screen,
then touch .
•
Display will change from to .
To return to the original speed, touch .
•
You can set to start conversation with .
(
Page 126
)
Page
33
This function plays the call sound or a baby's cry during
conversation to give you an excuse to end the conversation.
Touch during the conversation.
Page
33
You can extend conversation time about every minute.
Conversation can be extended up to about 3 minutes.
Touch during the conversation.
•
will start flashing about 50 seconds after you start talking.
•
In the Building Manager Room, begins flashing
approximately 3 minutes and 50 seconds after talking begins.
Touch during talking to talk for up to about 10 minutes.
Page
34
When you do not want to answer a call, you can play an
absence message with the Pretending to Be Out Function.
Touch while being called.
•
You can choose your absence message with the settings.
(
Pages
123 to 125
)
•
You can delete indicator with the settings.
(
Pages
123 to 125
)
* The extension adapter for your dwelling unit (VGD8210) (sold separately) is
required to be installed on the Base Unit to connect the Call Sub-base Unit.
Unlocking the Main Entrance
(Luminous Unlock Button)
Page
23
解錠
UNLOCK
OFF
TALK
button
* The figure indicates
a typical model.
* Please see the reverse side for information on the operations of the call sub-base unit.
The Main Entrance will be
unlocked.
When you press the Unlock
button, the display on the
screen disappears in 5
seconds and conversation
automatically ends.
While talking with the caller at the Main Entrance, press
the Unlock button flashing in green.
OFF Button
Microphone
Caller display
For the base unit
Unlock
Button
Flashes when the door can be
unlocked (luminous Unlock Button)
Содержание Windea HA D Series
Страница 34: ...MEMO MEMO ...
