Panasonic VL-SWD501EX, Руководство по эксплуатации

Страница: 40 / 324

When repeaters are not used:
When repeaters are used:
10.2.1 Registering a repeater to the main
monitor
1
: From the top menu, touch
®
®
[Register/Cancel]
®
[Register]
®
[Repeater]
®
select the number of the repeater to be
registered.
2
Registering the first repeater:
Go to step 3.
Registering the second repeater:
Select the connection method according to how you
want to use the repeater. (
®
page 39)
R If [Connected together] is selected, go to step 5.
3
Touch [Next].
4
Select the device that you want the repeater to
connect to.
R After this, use the repeater and complete the
following steps within about 2 minutes.
5
: Connect power to the repeater that you want
to register, and then press PROGRAM ( A ) for about
3 seconds.
R The
ID
indicator ( B ) flashes green.
A
B
R The indicator lights when the registration is
completed.
(Depending on the signal status, the indicator
may not light in green. In this case, see the
repeater’s Getting Started.)
6
: Press .
Note:
R When using devices in separate buildings or over
long distances, cut outs and image distortions may
not be improved even if a repeater is used.
10.3 Cancelling sub monitors,
cameras, and repeaters
– Cancelling can only be performed on the main
monitor.
1
From the top menu, touch
® ®
[Register/Cancel]
®
[Cancel]
®
select the type of
device to be cancelled.
2
Select the device to cancel from the displayed list.
R Cancelling repeaters:
When 2 repeaters are connected together, only
the farthest from the main monitor can be
cancelled.
3
Confirm the message and then touch [Yes].
R A beep sounds and "Cancel completed" is
displayed.
4
To end the operation, press .
Important:
R To prevent incorrect operations, remove the
batteries from cancelled sub monitors.
40
10. General information