background image

1. Important information

4

1.6 General information

R

In the event of problems, you should contact your 
equipment supplier in the first instance.

R

After removing the product and any included items 
from the packaging, store, dispose, or recycle the 
packaging as necessary. Note that certain types of 
packaging may be a suffocation or choking hazard.

R

Main monitor station is described as "main monitor" 
in this manual.

R

In this manual, the suffix of each model number 
(e.g., the "EX1" in "VL-MV10EX1") is omitted unless 
necessary.

R

When the suffixes are used to describe models 
(e.g., "EX1 models"), the suffixes refer to all models 
in the series.

R

The illustrations in the supplied manual(s) may vary 
slightly from the actual product.

Caution:

R

Before attempting to connect or operate this 
product, please read the label on the rear of the 
main monitor.

Graphical symbols for use on equipment and their 

descriptions

Disposal of Old Equipment (Only for European 

Union and countries with recycling systems)

This symbol (

A

) on the products, packaging, and/or 

accompanying documents means that used electrical 
and electronic products must not be mixed with general 
household waste.
For proper treatment, recovery and recycling of old 
products, please take them to applicable collection 
points in accordance with your national legislation.
By disposing of them correctly, you will help to save 
valuable resources and prevent any potential negative 
effects on human health and the environment. For more 
information about collection and recycling, please 
contact your local municipality.
Penalties may be applicable for incorrect disposal of 
this waste, in accordance with national legislation.

Information on Disposal in other Countries outside 
the European Union

Above symbol (

A

) is only valid in the European Union. 

If you wish to discard this product, please contact your 
local authorities or dealer and ask for the correct 
method of disposal.

Symbol

Explanation

Alternating current (A.C.)

Direct current (D.C.)

Protective earth

Protective bonding earth

Functional earth

For indoor use only

Class 

P

 equipment (equipment in 

which protection against electric shock 
relies on Double Insulation or 
Reinforced Insulation)

"ON" (power)

"OFF" (power)

Stand-by (power)

"ON"/"OFF" (power; push-push)

Caution, risk of electric shock

Symbol

Explanation

1

prj_4365-as_is.book  Page 4  Monday, August 27, 2018  6:03 PM

Содержание VL-MV10













Отзывы: