Ho
w to U
se Menu F
unc
tions
39
Menu
Item
Adjustments / Configurations (alternatives)
P
ic
tur
e
A
d
v
anc
ed S
ettings
Intelligent Frame
Creation
Automatically compensates the picture frame rate and removes juddering movements
to make the images smooth
[Off] / [Mid] / [Max]
•
Depending on the contents, images may be noisy. To prevent the noise, change the setting.
•
This function is not available for selection (default to [Off ]) when [Viewing Mode] is
set to [Game] or in the mode of network service operations.
24p Smooth Film
Automatically compensates the picture frame rate to make the 24p source movie
images smooth
[Off] / [Mid] / [Max]
•
This is available only for 24p signal input and displayed instead of [Intelligent Frame Creation].
•
This function is not available for selection (default to [Off ]) when [Viewing Mode] is
set to [Game] or in the mode of network service operations.
Clear Cinema
Improves vertical resolution for movie images
[Off] / [On]
•
This function is available for the interlaced signal (except when [Viewing Mode] is set to [Game]).
3D Refresh Rate
Reduces juddering and flicker noises of the 3D images
[Auto] / [100Hz]
•
If the room is lit by fluorescent lights / dimmers (50 Hz) and light appears to flicker
when using the 3D Eyewear, set to [100Hz].
Resolution Enhancer
Enhances the picture resolution to make the image sharper
[Off] / [Mid] / [Max]
•
This function is available for SD (Standard definition) signal.
•
As for HD (High definition) signal, this function is available when aspect mode is set to
[16:9] ([16:9 Overscan] is set to [On]), [4:3 Full] or [Zoom].
•
Not valid on Media Player and network service operations
Side Panel
Increases the brightness of the side panel
[Off] / [Low] / [Mid] / [High]
•
The recommended setting is [High] to prevent panel “image retention”.
16:9 Overscan
Selects the screen area displaying the image
[Off] / [On]
[On] :
Enlarges the image to hide the edge of the image.
[Off] :
Displays the image in the original size.
•
Set to [On] if noise is generated on the edge of the screen.
•
This function is available when aspect is set to [Auto] (16:9 signal only) or [16:9].
•
This function can be memorized separately for SD (Standard definition) and HD (High
definition) signals.
•
Not valid on VIERA Connect
DVI Input Setting
Changes the black level in the image for HDMI input mode with DVI input signal manually
[Normal] / [Full]
•
When the DVI input signal from the external equipment, especially from PC, is
displayed, the black level may not be suitable. In this case, select [Full].
•
The black level for HDMI input signal will be adjusted automatically.
•
For HDMI input mode with DVI input signal only
Pixel Orbiter
Selects the mode for wobbling of the image to prevent panel “image retention”
[Auto] / [On]
[Auto] :
Automatically works only for the appropriate images and you rarely recognise
the wobbling.
Scrolling Bar
Scrolls the vertical bar to prevent panel “image retention”
•
Press the OK button to start scrolling and press any buttons (except Standby) to exit this mode.
Reset to Defaults
Press the OK button to reset the present Picture Viewing Mode to the default settings
S
ound
Mode
Selects the basic sound mode
[Music] / [Speech] / [User]
•
The selected mode affects all input signals.
[Music] :
Improves sound quality for watching music videos, etc.
[Speech] :
Improves sound quality for watching news, drama, etc.
•
Music and Speech modes use CONEQ™ brand equalization technology to improve
sound quality. CONEQ equalizes acoustic power frequency response and corrects time
and phase alignment errors of a speaker system. Speakers with CONEQ perform as
near-perfect electro-acoustic transducers providing true to the original sound with
the highest musically and intelligibility.
•
In Music and Speech modes, you can adjust [Bass] and [Treble] settings, and those
settings will be stored for each mode.
[User] :
Adjusts the sounds manually by using the equaliser to suit your favourite sound quality.
•
For the User mode, [Equaliser] will appear on the Sound Menu instead of [Bass] and
[Treble]. Select the [Equaliser] and adjust the frequency.
[Equaliser] (p. 40)
Bass
Increases or decreases level to enhance or minimise lower, deeper sound output
Treble
Increases or decreases level to enhance or minimise sharper, higher sound output
