65
FAQs, etc.
•
On screen messages
Message
Meaning / Action
No Service
•
The broadcaster has stopped the service.
No Signal
•
Check the connection of the RF cable.
Other Satellite Service list is full
•
No more Other Satellite services can be added.
Up to 999 services can be stored.
PIN incorrect !
•
The PIN number you entered is wrong.
Please check settings and connections
on HDMI devices.
•
Communication error in VIERA Link function (p. 52).
Please choose a frequency between
9750 and 12750 MHz
•
The frequency you entered is out of range. Please consult the received
satellite broadcasting company.
Please wait.
•
A function is in progress.
Recording this service now
•
The recorder is recording the programme signal from its own tuner. You
can turn the TV off and leave the equipment recording in the normal way.
Sending Preset Data Please wait !
•
Q-Link or VIERA Link programme download is in progress.
Shipping condition completed.
TV can now be switched off.
•
“Auto Setup” will automatically start when Mains power On / Off switch is
next turned On. (p. 10)
Software successfully updated
Press EXIT to continue
•
The software updating is
fi
nished.
Software Update failed. Please try again
later.
Press EXIT to continue
•
Perform “System Update Search Now” in System Update (p. 37).
If this is still unsuccessful, there may not be any new software available.
Timer already expired !
•
Starting time in Timer Programming is already past. Set correctly (p. 47).
Timer Event Due to Start
DVB 1: BBC1 has been
Programmed for recording at 20:00
•
This message will appear 2 minutes before timer programming event due
to start.
Timer incorrect !
•
Set Start and End times in Timer Programming correctly (p. 47).
Tuner Locked
Please stop recording to operate
•
If you want to unlock, cancel Direct TV Recording (p. 51 and p. 53) or
Timer Programming (p. 46).
Unable to acquire IP address
•
Unable to obtain the IP address. Check the settings and connections of
the router.
Unable to download, Check Equipment
•
The tape or disc is active. Stop the equipment and try again.