background image

VQT0K98

3

English

Be sure to read the following before opening 
the package of CD-ROM

This Agreement will take effect at the moment you open the package of the storage device (CD-ROM) provided with this 
product, if you agree to the terms herein.
If you do not accept the terms of this Agreement, immediately return the unopened package of storage medium and 
enclosed materials (printed matter, external package, and all others) to your dealer, or return only the package of storage 
medium to your dealer.

This License Agreement certifies that you were granted license in the past.

License Agreement

Article 1 Grant of License

Matsushita Electric Industrial Co., Ltd., grants you the following rights for the following products (to be referred to as “This 
Software” hereafter) that you have obtained with this Agreement:

(a)  You may use This Software only on a single piece of equipment. However, if this equipment cannot 

be used because of mechanical problem, you may temporarily use This Software on another piece of 
equipment.

(b) Although This Software contains several components that can be run on computer as independent 

functions, all components are licensed as a single product: You may not, by any means, use these 
components on different computers at the same time.

Article 2 Copyrights

The copyrights of This Software, attached manual, etc. are owned by the following corporations, and are protected by 
copyright laws in Japan and USA, as well as by other intellectual property and international properties:

Article 3 Other Rights and Limitations

(

a)  You may not copy This Software or any of the printed materials attached, except for duplications to provide back-

up or storage.

(b)  Use of This Software by third parties is prohibited, whether by transferring, renting, leasing, lending, moving, or any 

other measures.

(c)  You may not decompile or disassemble this Software.
(d) Duplication and/or distribution of any files on this storage medium for commercial use is prohibited.

Article 4 Quality Assurance

Under no circumstances will Matsushita Electric Industrial Co., Ltd. Hitachi, Ltd., or Sonic Solutions accept any 
responsibility for any damages you may incur from using or being unable to use This Software (including, but not limited 
to, loss of business profit, interruption of business, loss of business information, or other monetary damages).

Article 5 Termination of Agreement

If you fail to comply with the terms of this Agreement, Matsushita Electric Industrial Co., Ltd. Hitachi, Ltd., and Sonic 
Solutions reserve the right to terminate the Agreement. In such a case, you will be obliged to discard all copies of This 
Software and its components.

Article 6 Prioritized License Agreement

When some software programs are installed, the license agreements will be displayed (to be referred to as online license 
agreement).
If the online license agreement conflicts with this Agreement, the online license agreement shall have a priority.

Name of Software

Copyright Owners

USB Driver

Hitachi, Ltd.

DVD-RAM Driver

Matsushita Electric Industrial Co., Ltd.

DVD-MovieAlbumSE

Matsushita Electric Industrial Co., Ltd.

MyDVD

Sonic Solutions

171

ENG.book  Page 3  Tuesday, March 23, 2004  8:12 PM

Содержание VDR-M50GC












































































































































































Отзывы: