18
Useful Information
Installing Software
6
Touch [Exit] and double-touch [Save Values and Reboot].
At the confirmation message, touch [Yes].
The computer will restart.
7 Press (Rotation lock) button while [Panasonic] boot screen is dis-
played.
The Setup Utility starts up.
l
If the password is requested, enter the Supervisor Password.
8
Touch [Exit], then double-touch your DVD drive in [Boot Override].
The computer will restart.
9
Touch [Reinstall Windows] and touch [Next].
10 Touch [YES].
11 At the License Agreement screen, touch [Yes, I agree to the provisions
above and wish to continue!] and touch [Next].
12 Touch [Next].
If the option is displayed, select the setting and touch [Next].
l
[Reinstall Windows to the System Disk to factory default.]
Select this option when you want to install Windows to the factory default. After instal-
lation, you can create a new partition. For how to create a new partition, refer to “To
change the partition structure” (
è
page 8).
l
[Reinstall to the OS related partitions.]
*1
Select this option when the flash memory has already been divided into several parti-
tions. For how to create a new partition, refer to “To change the partition structure”
(
è
page 8).
You can keep the partition structure.
*1
This does not appear if Windows cannot be installed to the recovery partition and the area us-
able by Windows.
13 At the confirmation message, touch [YES].
Installation starts according to the instructions on the screen. (It will take approximately
30 - 45 minutes.)
l
Do not interrupt installation, for example by turning off the computer.
Otherwise installation may become unavailable as Windows may not start up or the
data may be corrupted.
14 When Ending process screen is displayed, remove the Recovery Disc
and DVD Drive and then touch [OK].
Follow the on-screen instructions.
Some models may take approximately 40 minutes.
15 Perform the “First-time Operation” (
è
page 6).
NOTE
l
The date and time, and the time zone may not be correct. Be sure to set them correctly.
16 Start the Setup Utility and change the settings as necessary.
17 Perform Windows Update.
18 <Only for model with TPM> Clear TPM (
è
page 16).
