Panasonic Toughbook CF-T8EWDTZ2M, Руководство по эксплуатации

Страница: 23 / 40

23
Get
ting St
arted
U
seful In
formati
on
Troubleshooting
Appendix
CAUTION
You can use the following characters to set Intel(R) ME Password.
• Minimum of 8 and maximum of 32 characters are used.
• 1 or more numeric characters are included.
• 1 or more special characters (example: “!” “$”) are included (only characters that can be displayed with the US
keyboard).
• Capital letters and small letters are mixed.
When you are entering your password, the software recognizes the keyboard as a US keyboard. As a result,
depending on the keyboard you are using, different characters (unintended characters) may be entered for certain
keys.
The following table shows some examples.
When an unintended character is entered, we recommend that you make a memo of the key you pressed and the
character that was entered.
1 Click [start] - [Run] and input “c:\util\drivers\amt\MEI\setup.exe”, then click [OK].
Follow the on-screen instructions.
2 If [Serial Over LAN] is set to [ENABLED] in the Intel(R) AMT Configuration, click [start] -
[Run] and input “c:\util\drivers\amt\LMS_SOL\setup.exe”, then click [OK].
Follow the on-screen instructions.
Keyboard used Difference examples
UK Intended character “ £ ~ # @
Entered character @ # ¦ \ “
German Intended character “ § & ß Z
Entered character @ # ^ - Y
French Intended character 1 & ? A W
Entered character ! 2 M Q Z
Italian Intended character “ £ & / (
Entered character @ # ^ & *
Spanish Intended character “ & / ¿ Ñ
Entered character @ ^ & + :
Swedish Intended character “ ¤ & / Å
Entered character @ $ ^ * {
Belgian Intended character 1 & ^ A W
Entered character ! 1 [ Q Z
Swiss-German Intended character + & ? ! Z
Entered character ! ^ – } Y
Installing the driver
CPE01942ZA_T8-OI_XP_M.book Page 23 Friday, November 21, 2008 10:31 AM