159
Setup Utility
You can make the settings of the computer’s operating environment (password settings, startup drive selection, etc.)
1
Turn on or restart the computer.
2
Press
F2
or
Del
while [Panasonic] boot screen is displayed soon after the computer starts
the startup procedure.
When [Enter Password] is displayed, enter your password.
When you start the Setup Utility with Supervisor Password
You can make the settings of all items of the Setup Utility.
When you start the Setup Utility with User Password
Note the following:
• In the [Advanced] menu, you cannot make the settings of all items.
• In the [Security] menu, you can change only the User Password when [User Password Protection] is set to
[No Protection]. You cannot delete the User Password.
• In the [Exit] menu, you cannot make the setting of [Load Default Values] and [Boot Override].
•
F9
(Setup Defaults) does not function.
NOTE
If the [Panasonic] boot screen is not displayed, turn on the computer while holding down
F2
or
Del
.
The [Panasonic] boot screen may not appear when only the external display is being used. In this case, as soon as the
computer starts up, press
F2
or
Del
several times and start the Setup Utility.
Starting the Setup Utility
