7
Step 4 User Fingerprint Enrollment
Performed by each user.
1
Click [start] - [All Programs] - [Protector Suite QL] - [User En-
rollment].
The “Welcome” message appears, read the description carefully.
2
Click [Next].
3
Select an enrollment mode, and click [Finish].
Enrollment mode
You can make the configuration for the enrollment only once during this initializa-
tion phase.
·
Enrollment to the biometric device
All enrolled fingerprints are stored directly in the fingerprint sensor. The user
data will be secured by the hardware protection keys obtained by the fingerprint
sensor. This mode allows up to 21 fingerprints to be enrolled.
·
Enrollment to the hard disk
All enrolled fingerprints are stored on the hard disk. Hardware protection of the
user data is not possible, but multiple users can enroll their fingerprints.
When the “Finish” screen appears, read the description carefully.
“User Enrollment” wizard starts. Follow the on-screen instructions.
If the “Invalid TPM status” message is not displayed, click [start] - [All Programs]
- [Protector Suite QL] - [Control Center] - [Settings] - [System Settings] - [TPM]
- [Initialized TPM].
NOTE
Enroll at least two fingers. Even if one of them is injured, you can use
another one to access your account and secret data. For further informa-
tion about the enrollment, refer to “How to Use the Fingerprint Reader”
(
Î
page 3) and “Fingerprint Tutorial”. (Click [start] - [All Programs] - [Pro-
tector Suite QL] - [Fingerprint Tutorial].)
NOTE
1
Click on the “Invalid TPM status” message to start “Advanced
Security Initialization Wizard”.
Follow the on-screen instructions.
