57
English
Note
●
If [4K/60p/SDR] or [4K/60p/HDR] is selected and
pictures are not displayed correctly during 4K
video signal input, switch the setting to [4K/30p].
●
If [4K/60p/SDR], [4K/60p/HDR] or [4K/30p] is
selected and pictures are not displayed correctly
during 2K or lower video signal input, switch the
setting to [2K].
●
For details of signals written in EDID of [4K/60p/
SDR], [4K/60p/HDR], [4K/30p] and [2K], see
“Preset Signals” (see page 128).
■
[Dynamic range]
This menu is displayed in HDMI 1 and HDMI 2 inputs.
Switches the dynamic range.
[Auto]:
Sets automatically according to the AVIInfoFrame
information.
[HDR(PQ)]
Sets the dynamic range in compatible with HDR
(PQ (Perceptual Quantization)).
[HDR(HLG)]:
Sets the dynamic range in compatible with HDR
(HLG (Hybrid Log Gamma)).
[SDR]:
Sets the dynamic range in compatible with SDR.
■
[Colour gamut]
This menu is displayed in HDMI 1 and HDMI 2 inputs.
Switches the colour gamut.
[Auto]:
Sets the colour gamut automatically according to
the ITU-2020 emu. information of AVIInfoFrame.
[Native]:
Displays with the colour space unique to this unit.
[ITU-2020 emu.]:
Displays with the colour space close to the ITU-R
BT2020 standard.
■
Input signal display
Displays the frequency and the type of the current
input signal.
60.00 Hz
74.18 MHz
1080/60i
33.72 kHz
H-freq.
V-freq.
Dot clock freq.
Signal format
HDCP status None
Display range:
Horizontal (15 kHz ‒ 135 kHz)
Vertical (24 Hz ‒ 120 Hz)
The dot clock frequency is displayed when Digital and
PC signal are input.
The HDCP status information is displayed when
digital signals are input.
Power on settings
Makes various settings at power-on.
[Power on settings] - submenu screen
0
Power on settings
Initial input
Initial startup
Initial VOL function
Initial VOL level
Information(Power management)
Power ON screen delay
Information(No activity power off)
Off
Last memory
Off
Off
Off
Off
■
[Initial input]
Sets the input at power-on.
[Off] / [HDMI1] / [HDMI2] / [DisplayPort] / [DIGITAL
LINK] / [
DVI-D
] / [SLOT] / [PC] / [USB] / [MEMORY
VIEWER
] / [Multi input display]
Note
●
When [Input lock] is set to the item other than [Off],
this menu will be greyed out and cannot be set. (see
page 69)
■
[Initial startup]
Sets the power status of the main unit when the
power plug is inserted/extracted, or when the power
is restored from instantaneous interruption due to
blackout, etc.
[Last memory]:
Restored to the state before the power is turned
off.
[On]:
Restored to the power-on state. (power indicator:
green)
[Standby]:
Restored to the standby state. (power indicator:
red / orange)
Note
●
When multiple units are installed, it is recommended
to select [Standby] to reduce the load when the power
is restored.
■
[
Initial VOL function
]
Enables/Disables the volume setting function at
power-on.
[Off]:
Volume before power-off
[On]:
Volume set for [Initial VOL level]
