14
English
Attaching the Function Board
When using a narrow-width function board, attach the
supplied SLOT adaptor, and insert it to the slot.
Note
●
Before attaching or removing the function board, be
sure to turn off the power of the display and remove
the power plug from the outlet.
When attaching a full-size function board, proceed to
step
4
.
1
Remove one screw from the side with
the guide on the SLOT adaptor.
SLOT adapter
Screw
Guide
2
Fit the circuit board of the function
board in the guides of the SLOT
adaptor, and bring the circuit board
into contact with the hook (one
location) and the end faces (two
locations) securely.
Function board
Hook
End face
End face
3
Using the screw removed in step 1,
fix the function board to the SLOT
adaptor.
Screw
●
Tightening torque guideline: 1.4 N·m or less
Note
●
Firmly tighten the screw, and check that the hook of
the SLOT adaptor fixes the circuit board.
●
Check that the surface of the SLOT adaptor and the
surface of the circuit board match with each other
when the function board with the SLOT adaptor
attached is viewed from the opposite side of the
cover.
Make sure that this side is aligned.
Circuit board
SLOT adaptor
×
×
It cannot be attached unless this side is horizontally
aligned.
