English
- 18 -
Shipping
When turned on for the first time, the language
selection screen will be displayed. Select the desired
language and press
ENTER
.
On the next screen, set your country preference and
press
ENTER
to continue.
You will be asked to set and confirm a PIN at this point.
For some country options, the PIN cannot be set to
0000
, in this case you need to enter another 4-digit
number combination. You have to enter this PIN if you
are asked to enter a PIN for any menu operation later.
The
Signage Settings
menu will be displayed next.
Set ID
,
OSD Orientation
,
Auto Software Update
options can be configured using this menu.
Model
name
,
Serial number
and
Software version
options
are for information only. They will be grayed out and
not selectable. You can save the model information
data of the Display to a connected USB device using
the
Save model information
option. You can also
copy database files from a connected USB device to
the Display using the
Clone from USB
option. Refer
to the
Signage Settings Menu Content
section for
more information on the options of this menu. After
the settings are completed, highlight
Next
and press
ENTER
to continue.
The
Auto Launch Selection
screen will be displayed
next.
Open Browser
and
Disabled
options will be
available. Highlight the desired option and press
ENTER
to proceed.
On the next screen, the
Network/Internet Settings
menu will be displayed. Please refer to
Connectivity
section to configure a wired or a wireless connection.
If you want your Display to consume less power in
standby mode, you can disable the
Wake On
option
by setting it as
Off
. After the settings are completed
highlight
Next
and
press
ENTER
button to continue.
The
Shipping
is completed.
To repeat this process and reset the Display's settings
to the factory defaults enter the
Settings>Signage
menu, highlight
Shipping
and press
ENTER
. You will
be asked to enter the PIN that you have defined in
the First Time Installation. If the correct PIN is entered
a confirmation message will be displayed asking
whether you want to delete all settings and reset the
Display. Select
Yes
and press
ENTER
to confirm.
Note:
Do not turn off the Display while initializing first time
installation. Note that, some options may not be available
depending on the country selection.
Note:
If you forget the PIN, please contact the service company.
Note:
The initial value of PIN is "0000".
Using Main Display
Menu
When the
Menu
button is pressed, the main Display
menu will appear at the left of the screen. You can
navigate through the menu items using the directional
buttons on the remote. To select an item or see the
sub-menu options of the highlighted menu press
ENTER
button. When you highlight a menu option
some of the sub-menu items of this menu may appear
on the upper side of the menu bar for quick access.
To use a quick access item highlight it, press
ENTER
and set as desired using the Left/Right directional
buttons. When finished press
ENTER
or
EXIT/
RETURN
button to exit.
Press
EXIT
button to close the main menu.
1. Home
When main menu is opened
Home
menu bar will
be highlighted. The content of the
Home
menu can
be customised by adding options from other menus.
Just highlight an option and press the Down direction
button on the remote. If you see
Add to Home
option
you can add it to the
Home
menu. Same way you can
delete or change the position of any item in the
Home
menu. Press the Down direction button and select
Delete
or
Move
option and press
ENTER
. In order
to move a menu item use the Right and Left direction
buttons to select the position that you want the item
to move to and press
ENTER
.
2. Settings
You can manage the settings of your Display using
the options of this menu. Refer to
Settings Menu
Contents
section for more information.
3. Apps
When your Display is connected to the Internet related
contents will also be available, including
Apps
related
contents. Using the
Apps
menu you can access
your applications. Refer to
Apps
section for more
information.
4. Sources
You can manage your input source references using
the options of this menu. To change the current source
highlight one of the options and press
ENTER
.
4.1. Source Settings
Enable or disable selected source options. There
are also
Regular
,
Enhanced
and
Disabled
options
available for HDMI source.
Regular
and
Enhanced
options are affecting the colour settings of the HDMI
source. To be able to watch 4K or HDR/HLG images
from the HDMI source its source setting should
be set as
Enhanced
if the connected device is
compatible with HDMI 2.0 and subsequent versions.
Set as
Regular
if the connected device is HDMI 1.4
