98
Operating Instructions
17 Using the IP Setting Software
Changing Network Settings
When changing settings related to the network settings, such as connection mode, IP address, and subnet mask,
click the [Network Settings] button in [IP Setting Software] screen.
The “Network Settings” screen is displayed. Enter each item and then click the [Save] button.
Note
By unchecking the “Wait for camera restarting.” checkbox, multiple cameras can be continuously
configured.
For further information about each setting of the “Network Settings” page, refer to section 13.
IMPORTANT
It may take for around 2 minutes to complete to upload the settings to the unit after clicking the [Save]
button. The settings may be invalidated when the LAN cable is disconnected before completing the upload.
In this case, perform the settings again.
When using a firewall (including software), allow access to all UDP ports.
