Operating Instructions
7
1 Monitor Images on a PC
1 Monitor images on a PC
The following are descriptions of how to monitor images from the camera on a PC.
1.1
Monitor images from a single camera
1.
Start up the web browser.
2.
Enter the IP address designated using the
Panasonic “IP Setting Software” in the address box of the
browser.
Example when entering an IPv4 address:
http://URL registered using IPv4 address
http://192.168.0.10/
Example when entering an IPv6 address:
http://[URL registered using IPv6 address]
http://[2001:db8::10]/
<Example of IPv4 access>
<Example of IPv6 access>
IMPORTANT
When the HTTP port number is changed from “80”, enter “http://IP address of the unit + : (colon)+ port
number” in the address box of the browser. (Example: http://192.168.0.11:8080)
When the PC is in a local network, configure the proxy server setting of the web browser (under [Internet
Options...] under [Tools] of the menu bar) to bypass the proxy server for the local address.
Note
Refer to section 13.3 for further information about the case in which “HTTPS” is selected for “HTTPS” -
“Connection” on the [Network] tab of the “Network” page (section 13).
3.
Press the [Enter] key on the keyboard.
The “Live” page will be displayed. Refer to section 1.2 for further information about the “Live” page.
