Page 5 of 13
Model
Name
Model
No.
Switch-M8eGi
PN28080i-ID
Product Specification
401-28080i-ID-SP01
Panasonic Life Solutions Networks Co., Ltd.
Date revised
Date issued
May. 26, 2020
5－4. LED display
Switch two types of Base mode s and their LEDs in the following way:
Boot
Press “LED DISPLAY CHANGE BUTTON” manually.
Automatic
Automatically returns to Base mode after 1 minute.
Boot
When Base mode is Status mode （factory default setting）
When Base mode is ECO mode
Switch Base mode（keep pressing “LED DISPLAY
CHANGE BUTTON” over 3 seconds）
LED lamps for each mode and LED lamps for ports 1 to 9 correspond as the following.
（Table 1）
Press “LED DISPLAY CHANGE BUTTON” manually.
Automatic
Automatically returns to Base mode after 1 minute.
Table 1
Display mode
Behavior
Description
STATUS/ECO
GIGA
100M
Full
LOOP
HISTORY
Green Light
Green Blink
Off
Green Light
Off
Port
LED
Left
Right
－
Port LED（Left）
Port LED（Right）
5. Hardware Specifications
Link is established
Transmitting and receiving data.
No device connected.
Link is established at 1000Mbps.
Link is established at 100Mbps or
10Mbps , or no device is connected.
Green Light
Off
Link is established at 100Mbps.
Link is established at 1000Mbps or
10Mbps , or no device is connected.
Green Light
Off
Link is established at full-duplex.
Link is established at half-duplex or
or no device is connected.
Green Light
Off
Loop has been detected within the
last 3 days.
No loop detection history.
Orange Light
Off
Shutting down by loop detection.
Not shutting down by loop detection.
Status mode
（Base mode）
GIGA mode
Speed mode
DUPLEX
mode
Loop History
mode
GIGA
mode
Speed
mode
DUPLEX
mode
Status
mode
ECO mode
（Base mode）
Loop History
mode
5－6. Fan
Fan-less
5－5. Cascade connections
Port 1-8 corresponding to the Auto MDI / MDI-X
（
Allowed change by the setting for the application
）
Ports 1-7 are set to "Disable" at factory default setting.
