Page 13 of 13
Model
Name
Model
No.
Switch-M8eGi
PN28080i-ID
Product Specification
401-28080i-ID-SP01
Panasonic Life Solutions Networks Co., Ltd.
Date revised
Date issued
May. 26, 2020
14. Basic Instructions for the Use of This Product
（1） For inspection and/or repair, consult the shop.
（2） Use commercial power supply from a wall socket, which is close and easily accessible to this Switching Hub.
（3） Unplug the power cord when installing or moving this Switching Hub.
（4） Unplug the power cord when cleaning this Switching Hub.
（5） Use this Switching Hub within the specifications. Deviation could lead to malfunction.
（6） Do not touch the twisted pair cable modular metal terminals which are connected to RJ45 connectors (twisted pair ports) or
the connectors, nor place them near electrically-charged objects. Static electricity could lead to equipment failure.
（7） Do not put the modular plug of the connected twisted pair cable on objects that can carry static charge, such as carpet.
Do not place it in the proximity. Static electricity could lead to equipment failure.
（8） Do not put a strong shock, including dropping, to this Switching Hub. Deviation could lead to equipment failure.
（9） Before connecting a console cable to the console port, discharge static electricity, for example by touching metal
appliance （do not discharge by touching this Switching Hub）.
（10） Do not store and/or use this Switching Hub in the environment with the characteristics listed below.
（Store and/or use this Switching Hub in the environment in accordance with the specification.）
- High humidity. Possible spilled liquid （water）.
- Dusty. Possible static charge （such as carpet）.
- Under direct sunlight.
- Possible condensation. High/low temperature exceeding the specifications environment.
- Strong vibration and/or strong shock.
（11） Please use this Switching Hub in place where ambient temperature is from 0 to 60℃.
Failure to satisfy the conditions above may result in a fire, electric shock, equipment failure,
and/or malfunction. Such events are not covered by the warranty.
（12） Do not block the ventilator of the Switching Hub. Blocked ventilator induces the heat accumulation inside,
causing equipment failure and/or malfunction.
（13） If any module other than the optional SFP extension modules(PN54022/PN54024) is inserted into
the SFP extension slot, operation is not guaranteed. For the latest information about compatible SFP extension modules,
check our website.
（14） When using two Switching Hubs, do not stack them. When you place them side by side, allow for a space of 20 mm or
more between them.
13. Cautions when Using the Product to Guarantee Safety
（14） Be careful when performing the following operations since the device will be at high temperatures immediately after it has
been energized or the power has been shut off.
- Relocating the installation area, transporting, and attaching, and removing attachment brackets, etc.
- Connecting and disconnecting twisted pair cables, fiber optic cables, SFP modules and console cables
- Attaching, and removing power cords
- Operating LED display change buttons
Deviation could lead to injuries or burns, etc. because of high temperatures.
