Operation Examples
Important:
Failure to configure settings in
accordance with the operating environment can
cause operational errors. Configure the settings
while carefully checking the AUTO TRACK setting
(page 41).
Note:
If the alarm is turned on, an alarm signal is
continually output from ALARM OUT 1 while an auto
tracking operation is in progress.
4. Configure ALARM IN/OUT settings (page 45).
Select ALARM for CNT-CLS1.
5. Configure the SELF RETURN setting (page 35).
Select either 30S or SEQ.
Operation
Example
2:
While auto panning, the
camera moves to Preset
Position 1 in accordance with
input at ALARM IN 1 and then
performs auto tracking. To
return to auto panning
operation one minute after
auto tracking starts (50
seconds of auto tracking and
10 seconds of self-return)
-21-
This section describes a number of camera operation
examples. For details about operation, see page 41
(Auto Tracking Settings) of this manual, and the user
documentation that comes with the peripherals you are
using.
Operation
Example
1:
When following a preset
sequence (with alarm output),
the camera switches to auto
tracking when it reaches a
particular preset position,
and then returns to the preset
sequence after 30 seconds of
auto tracking.
1. Configure the PRESET settings (page 33).
Register each preset position.
For each registered preset position, select ON for
AUTO TRACK for the positions you want to include
in the auto tracking. Auto tracking will not include
any preset position whose AUTO TRACK setting is
OFF.
2. Configure the AUTO MODE setting (page 35).
Select SEQ for the AUTO MODE setting.
3. Configure the AUTO TRACK setting (page 41).
Select ON for the ALARM setting.
Configure the other parameters in accordance with
the operating environment.
PRESET NO. 1*
POSITION SET
PRESET ID
ALC/MANUAL
AF MODE
DWELL TIME
SCENE FILE
PRESET SPEED
AUTO TRACK
RET TOP DEL
ON
ALC
MANUAL L
10S
1
••••••I255
L H
ON
**PAN/TILT SETUP**1/2
PRESET 1
MAP
HOME POSITION
SELF RETURN
AUTO MODE
AUTOPAN KEY
PATROL
PRIVACY ZONE
IMAGE HOLD
DIGITAL FLIP
PROPO.P/T
OFF
OFF
SEQ
AUTO PAN
OFF
OFF
ON
ON
** AUTO TRACKING **
CAMERA HEIGHT
OBJECT SIZE
SENSITIVITY
TRACKING MODE
ZOOM CONTROL
AUTO RELEASE
LOST MODE
ALARM
AREA SET
INDICATOR
RET TOP
2.50M
SMALL
MID
MID
CONTINUOUS
OFF
ZOOM-OUT
ON
OFF
**PAN/TILT SETUP**1/2
PRESET 1
MAP
HOME POSITION
SELF RETURN
AUTO MODE
AUTOPAN KEY
PATROL
PRIVACY ZONE
IMAGE HOLD
DIGITAL FLIP
PROPO.P/T
OFF
30S SEQ
SEQ
AUTO PAN
OFF
OFF
ON
ON
Alarm Output 1
Auto Tracking Stop
Sequential
Movement
Sequential
Movement
Auto Tracking In
Progress
30 seconds
**ALARM IN/OUT**
ALARM IN1
ALARM IN2
ALARM IN3
ALARM IN4
CNT-CLS 1
TIME OUT
CNT-CLS 2
COAX ALM OUT
RET TOP
OFF
OFF
OFF
OFF
ALARM
100MS
OFF
OFF
Alarm IN 1
Auto Tracking Ends
Auto Panning
Auto Tracking Enabled
50 seconds
10 seconds
Auto Panning
WV-CW970 974̲ENG.qxd 07.2.1 11:31 AM ページ21
Содержание Super Dynamic III WV-CW974
