Panasonic SUPER DELUXE CS-XE9DKE Скачать руководство пользователя

Страница: 21 / 108

ii. Auto Fan Speed

1. Cooling, Ion, Oxygen

2. Heating

Note:

a. UP:

•

If move from Lo, the fan speed will be shifted to Maximum 1160 rpm (XE9DK), 1330 rpm (XE12DK).

•

If move from Maximum, the fan speed no change.

•

In up zone, 10 rpm is added for every 10s until Maximum 1160 rpm (XE9DK), 1330 rpm (XE12DK).

b. DOWN:

•

The fan speed will be decreased one step every 10 sec. until Minimum 840 rpm (XE9DK), 1100 rpm (XE12DK).

Current Output Fixed:

•

Maintain at present fan speed.

d. Instantaneous Maximum:

•

Fan speed will be increased to maximum auto fan speed.

CS-XE9DKE CU-XE9DKE / CS-XE12DKE CU-XE12DKE

Содержание SUPER DELUXE CS-XE9DKE













































































































Результаты поиска

Содержание SUPER DELUXE CS-XE9DKE

Отзывы:

Похожие инструкции для SUPER DELUXE CS-XE9DKE

Бренды по названию

Популярные бренды

Panasonic SUPER DELUXE CS-XE9DKE, Руководство по обслуживанию

Результаты поиска

Содержание SUPER DELUXE CS-XE9DKE

Отзывы:

Похожие инструкции для SUPER DELUXE CS-XE9DKE

Бренды по названию

Популярные бренды