66
LSQT1426
67
LSQT1426
Motion pictures and still pictures recorded with this unit can be viewed on TV.
For TV settings, see the operating instructions of the TV.
Connect the unit and AC adaptor (P.20) and set the mode dial to [
] or [
].
Connect the unit to a TV using the AV cable (supplied).
VIDEO IN
AUDIO IN
Insert the plugs as far as they will go.
Change the input mode on the TV.
Play back motion pictures or still pictures from the unit. (P.58, 61)
To display LCD monitor information on TV
→
[SETUP]
→
[EXT. DISPLAY]
→
[ON]
To not display the date, time and other icons see P.28, 32.
•
With other
products
2
Copying to video recorders
or DVD recorders
Motion pictures recorded with this unit can be copied to TV video recorders and
DVD recorders (hereinafter referred to as “recorder”). For recorders settings,
see the operating instructions for the recorders.
Copying pictures using the AV cable (supplied)
Connect the unit and AC adaptor (P.20) and set the mode dial to [
].
Connect the unit to a recorder using the AV cable (supplied).
VIDEO IN
AUDIO IN
Insert the plugs as far as they will go.
Change the input mode on the TV and recorder.
Play back motion pictures from the unit (P.58) and start recording on the
recorder.
After ending recording on the recorder, stop playback on the unit.
Do not use any other AV cables except the supplied one.
When copied motion pictures are played back on a wide-screen TV, the image
may be stretched in the vertical direction. In such cases, see the operating
instructions of the recorder. Also, see the operating instructions of the wide-
screen TV and set aspect ratio to 16:9 (full).
Copying (dubbing) pictures using DVD recorders with SD
card slot
By inserting SD cards recorded on this unit into DVD recorders with an SD card
slot, pictures can be copied onto hard disk drives and DVDs.
After shutting off power to the unit, eject the recorded SD card. (P.23)
Insert the SD card into the SD card slot of the DVD recorder.
For details, see the operating instructions of the DVD recorder.
The video format is converted when motion pictures recorded with this unit are
copied onto hard disk drives or DVDs. The converted motion picture cannot be
copied at high speed onto DVD-R discs.
Moreover, motion pictures that are copied back onto SD cards using a
computer or other device do not play back on this unit.
●
●
●
●
Do not use any other AV cables except the supplied one.
If images or audio are not output, check the following:
That the plugs on the AV cable are inserted into terminal as far as they can
go
That the plugs on the AV cable are connected to the correct terminals
That input settings and the selected input channel of the TV are correct
If pictures are not displayed correctly on a wide-screen TV, adjust the display
settings of the TV.
If the image is stretched in the vertical direction on the TV using a 4:3 aspect
ratio
→
[SETUP]
→
[TV ASPECT]
→
[4:3]
●
●
•
•
•
●
●
With other
products
1
Playback on TV