RQTX0165
33
Play
Functions and settings
Reset
(factory settings)
The operation settings
for the system will
be initialised to the
settings made at the
time of shipment.
All the settings are reset when you select
“YES”
and the input selector automatically switches to
“BD/DVD”
.
If you select
“NO”
, you will return to step
2
. To exit setup mode, press [RETURN] a few times to
display
“EXIT”
, and then press [OK].
•
•
2
1
Press
to select
“RESET”
.
3 Press
to select
“YES”
.
Press and hold
for about 2 seconds.
Press
to
confirm.
Select
“EXIT”
and
confirm to finish the
setup mode.
•
Press
to
confirm.
REAL C.,
BASS,
TREBLE, BALANCE, HDMI,
TV DELAY, DUAL PRG, DRCOMP, ATTENUATOR,
REMOTE, INPUT MODE, RESET, EXIT
YES, NO
Only appears when audio adjustment can be made.
Setting input
signals
Most sources can be
played with “
AUTO
”
(factory setting).
However, in the
following cases,
change the input signal
detection setting.
●
When the beginning
of the song is cut
during playback of
CD, set to “
PCM
”
(PCM FIX).
●
When the signal is
not detected during
playback of DTS
sources, set to
“
DTS
” (DTS FIX).
●
You can fix the
signal type (digital or
analog) supplied by
TV.
When noise occurs,
return the setting to
“
AUTO
”.
2
1
Press
to select
“INPUT
MODE”
.
Press and hold
for about 2 seconds.
REAL C.,
BASS,
TREBLE, BALANCE, HDMI,
TV DELAY, DUAL PRG, DRCOMP, ATTENUATOR,
REMOTE, INPUT MODE, RESET, EXIT
Press
to
confirm.
Select
“EXIT”
and
confirm to finish the
setup mode.
•
TV, DVD, AUX1, AUX2
AUTO
: Automatic detection
PCM
:
PCM (from CDs) digital input fixed
DTS
: DTS digital input fixed
ANLG
(
TV
only): Fixes the input signal to analog
DIG
(
TV
only): Fixes the input signal to digital
3 Press
to select source.
4 Press
to select input signal.
Factory setting:
AUTO
Press
to
confirm.
Press
to
confirm.
Only appears when audio adjustment can be made.
Repeat steps 3 and 4 to change setting.
5
Press
to
confirm.
Press
a few times to select
“EXIT”
.
Press
Return to previous menu/cancel.
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 33
7/16/2008 1:52:21 PM
