RQTX0165
14
Setting the caster stoppers
Stabilising the television
Attach the television to the rack to prevent it from falling over.
Fixing to the rack
Attach the fall-prevention band etc. supplied with TV using
the included screws as illustrated at right. (If the fall-pre-
vention band is not supplied with TV, use a commercially
available band to fix.)
Attach the fall-prevention band to the prepared hole in the
center of the underside of the top board.
If the hole is not positioned at a suitable place, drill
approx. 2 mm (
3
/
32
”
)
hole on the underside and attach the
band with the screw.
If you fasten the screw too tightly, it goes around in circles
and the TV cannot be fixed.
Fixing to the wall
Use commercially available screws, strong string or chain
suitable for materials of the wall or pillar to fix to the solid
parts.
Walls and pillars must be strong enough to support the
weight of TV. Ask installation personnel for more informa-
tion.
Fix 2 parts at both left and right.
•
•
•
•
•
(Setup example)
The illustration is an example.
The shape may differ from the actual product.
(Setup example)
Set the caster stoppers (included) under
the casters to fix this system and prevent
from moving.
When setting the caster stoppers, match the front side of
caster with the arrow of the caster stopper.
Lift the rack to remove caster stoppers. See page 11
about how to lift the rack.
•
•
(Caster stopper position)
Set the caster stoppers under 4 casters circled with the
dotted line of figure below.
Connection
Installing and assembling the rack
Installing and assembling the rack
Prepared
screw hole
Fall-prevention
band
Front
Caster stopper
Arrow
Front side
(Bottom side)
Screw (included)
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 14
7/16/2008 1:51:37 PM
