RQTX0165
10
Installation
Setup example
This system
This system
This system
At least 2 people are necessary for installation.
Use a Phillips-head screwdriver. (Do not use a powered screwdriver.)
Choose a stable location for installation.
Handle the glass top panel and glass doors with enough care.
Make sure to place the rack on a flat, stable surface so there is no danger of it falling over. Take enough safety
measures to prevent the television from falling down.
You can install this system so that it is flush with the wall at either the sides or back, but you will require some space
for working during setup and connection.
Do not place in front of curtains as they may obstruct the system’s exhaust hole.
Avoid pressing on the speaker nets during installation.
If the surface of the wooden floor is soft, the caster mark may remain.
See page 11 for removing casters.
•
•
•
•
•
•
Installing and assembling the rack
Connection
Installing and assembling the rack
Glass door assembly (
page 15)
Speaker net
Shelf assembly (
page 12)
Caution
Use the supplied speakers only with our home theater audio system. Failure to do so can damage the amplifier and
speakers, and can cause fire.
Consult a qualified service person if damage occurs or if performance worsens.
•
•
Installing each
equipment
Glass top
panel
assembly
(
page 12)
Setting the caster
stoppers
(
page 14)
(DVD player/Blu-ray Disc player/DVD recorder
page 13)
(TV
page 13)
SC-HTR310 (RQTX0165-P) - 14.07.08.indd 10
7/16/2008 1:51:20 PM
