25
Wall Mounting
Installation Instructions
9
Mount the unit securely onto the screws.
A
Move this unit so that the screw is in this position.
≥
Be sure that both the wall mount brackets are securely attached to the screws.
≥
If this unit is tilting forward, remove this unit from the screws and adjust by tightening the screws.
10
Push the lock pins fully into place.
A
Rear of this unit
B
Lock pin (supplied)
C
Screw (not supplied)
≥
Be sure to attach both lock pins correctly.
11
Attach the cord to a wall with a screw (not supplied).
≥
Keep the screws out of reach of children to prevent swallowing.
≥
Check the strength of the installation location. The position in the wall where the screw is to
be attached should be capable of supporting over 20 k
g
. If the strength at any of these
positions is lacking, provide sufficient reinforcement.
A
Rear of this unit
B
Fall prevention cord (not supplied)
C
Screw eye (not supplied)
E.g.,
SCHTB10EB_RQTX1166-B.book Page 25 Thursday, June 10, 2010 3:06 PM
