background image

19

Operating Instructions

Safety precautions

Set the unit up on an even surface away from 
direct sunlight, high temperatures, high humidity, 
and excessive vibration. These conditions can 
damage the cabinet and other components, 
thereby shortening the unit’s service life.
Do not place heavy items on the unit.

Do not use high voltage power sources. This 
can overload the unit and cause a fire.
Do not use a DC power source. Check the 
source carefully when setting the unit up on a 
ship or other places where DC is used.

Ensure the AC mains lead is connected 
correctly and not damaged. Poor connection 
and lead damage can cause fire or electric 
shock. Do not pull, bend, or place heavy items 
on the lead.
Grasp the plug firmly when unplugging the lead. 
Pulling the AC mains lead can cause electric 
shock.
Do not handle the plug with wet hands. This can 
cause electric shock.

Do not let metal objects fall inside the unit. This 
can cause electric shock or malfunction.
Do not let liquids get into the unit. This can 
cause electric shock or malfunction. If this 
occurs, immediately disconnect the unit from the 
power supply and contact your dealer.
Do not spray insecticides onto or into the unit. 
They contain flammable gases which can ignite 
if sprayed into the unit.

Do not attempt to repair this unit by yourself. If 
sound is interrupted, indicators fail to light, 
smoke appears, or any other problem that is not 
covered in these instructions occurs, disconnect 
the AC mains lead and contact your dealer or an 
authorised service center. Electric shock or 
damage to the unit can occur if the unit is 
repaired, disassembled or reconstructed by 
unqualified persons.

Extend operating life by disconnecting the unit 
from the power source if it is not to be used for a 
long time.

Licenses

Placement

Voltage

AC mains lead protection

Foreign matter

Service

Manufactured under license from Dolby 
Laboratories. Dolby, Pro Logic, and the 
double-D symbol are trademarks of Dolby 
Laboratories.

Manufactured under license under U.S. 
Patent #’s: 5,451,942; 5,956,674; 5,974,380; 
5,978,762; 6,487,535 & other U.S. and 
worldwide patents issued & pending.
DTS and the Symbol are registered 
trademarks & DTS Digital Surround and the 
DTS logos are trademarks of DTS, Inc. 
Product includes software.
© DTS, Inc. All Rights Reserved.

HDMI, the HDMI Logo, and High-Definition 
Multimedia Interface are trademarks or 
registered trademarks of HDMI Licensing LLC 
in the United States and other countries.

HDAVI Control™ is a trademark of Panasonic 
Corporation.

SCHTB10EB_RQTX1166-B.book  Page 19  Thursday, June 10, 2010  3:06 PM

Содержание SCHTB10 - HOME THEATER AUDIO SYSTEM





























Отзывы: