Panasonic SC-VK71D, Руководство по эксплуатации

Страница: 39 / 40

RQT7700
39
Reference
Specifications
AMPLIFIER SECTION
VK91D
RMS Output Power: Dolby Digital Mode
Front – High Ch 90 W per channel (6
Ω
), 1 kHz, 10% THD
Front – Low Ch 45 W per channel (12
Ω
), 100 Hz, 10% THD
Surround Ch 45 W per channel (6
Ω
), 1 kHz, 10% THD
Center Ch 100 W per channel (6
Ω
), 1 kHz, 10% THD
Subwoofer 95 W per channel (6
Ω
), 100 Hz, 10% THD
Total RMS Dolby Digital mode power 650 W
PMPO output power 7300 W
VK81D
RMS Output Power: Dolby Digital Mode
Front Ch 80 W per channel (6
Ω
), 1 kHz, 10% THD
Surround Ch 35 W per channel (6
Ω
), 1 kHz, 10% THD
Center Ch 85 W per channel (6
Ω
), 1 kHz, 10% THD
Subwoofer 85 W per channel (6
Ω
), 100 Hz, 10% THD
Total RMS Dolby Digital mode power 400 W
For Saudi Arabia, Kuwait, the Middle East, South Africa and Southeast Asia
PMPO output power 4800 W
VK71D
RMS Output Power: Dolby Digital Mode
Front Ch 70 W per channel (6
Ω
), 1 kHz, 10% THD
Surround Ch 35 W per channel (6
Ω
), 1 kHz, 10% THD
Center Ch 70 W per channel (6
Ω
), 1 kHz, 10% THD
Total RMS Dolby Digital mode power 280 W
PMPO output power 3000 W
FM/AM TUNER, TERMINALS SECTION
Preset station FM 15 stations
AM 15 stations
Frequency Modulation (FM)
Frequency range 87.50 – 108.00 MHz (50 kHz step)
Sensitivity 2.5 µV (IHF)
S/N 26 dB 2.2 µV
Antenna terminals 75
Ω
(unbalance)
Amplitude Modulation (AM)
Frequency range
For Saudi Arabia, Kuwait, the Middle East, South Africa and Southeast Asia
522 – 1629 kHz (9 kHz step)
520 – 1630 kHz (10 kHz step)
For Australia and N.Z.
VK81D
522 – 1629 kHz (9 kHz steps)
AM sensitivity S/N 20 dB at 1000 kHz 560 µV/m
Audio performance (Amplifier)
Input sensitivity/Input impedance
Aux 250 mV, 20 k
Ω
Phone jack
Terminal Stereo, 3.5 mm jack
For Saudi Arabia, Kuwait, the Middle East, South Africa and Southeast Asia
Mic jack
Sensitivity 0.7 mV, 600
Ω
Terminal Mono, 6.3 mm jack (2 system)
CASSETTE DECK SECTION
Type Auto Reverse
Track system 4-Track, 2 Channel
Head Record/Playback Solid Permalloy Head
Erasure Double Gap Ferrite Head
Motor DC Servo Motor
Recording System AC Bias 100 kHz
Erase System AC Erase 100 kHz
Tape Speed 4.8 cm/s
Overall Frequency Response (+3, –6 dB) at DECK OUT
Normal (TYPE I) 35 Hz –14 kHz
S/N Ratio 50 dB (A weighted)
Wow and Flutter 0.18% (WRMS)
Fast Forward and Rewind Time Approx. 120 seconds with
C-60 cassette tape
DISC SECTION
Disc played [8 cm or 12 cm]
(1) DVD-RAM (DVD-VR compatible, JPEG formatted disc)
(2) DVD-Audio
(3) DVD-Video
(4) DVD-R (DVD-Video compatible)
(5) CD-Audio (CD-DA)
(6) Video CD
(7) SVCD (Conforming to IEC62107)
(8) CD-R/CD-RW (CD-DA, Video CD, SVCD, MP3, WMA, JPEG
formatted disc)
(9) MP3/WMA
\
• Compatible compression rate:
MP3: between 32 kbps and 320 kbps
WMA: between 48 kbps and 192 kbps
(10) JPEG \
• Exif Ver 2.1 JPEG Baseline files
• Picture resolution: between 320x240 and 6144x4096
pixels
(sub sampling is 4:2:2 or 4:2:0)
(11) HighMAT Level 2 (Audio and Image)
\
The total combined maximum number of recognizable audio
and picture contents and groups: 4000 audio and picture
contents and 400 groups.
Pick up
Wavelength (DVD/CD) 662 nm/785 nm
Audio output (Disc)
Number of channels 5.1 ch (FL, FR, C, SL, SR, SW)
Audio performance (measurement at: Line out terminal)
Frequency response
•
CD-Audio 4 Hz – 20 kHz (+1, –2 dB)
VIDEO SECTION
Video system
Signal system PAL625/50, PAL525/60, NTSC
Composite video output
Output level 1 Vp-p (75
Ω
)
Terminal Pin jack (1 system)
S VIDEO output
Y output level 1 Vp-p (75
Ω
)
C output level 0.3 Vp-p (75
Ω
) (PAL)
0.286 Vp-p (75
Ω
) (NTSC)
Terminal S terminal (1 system)
Component video output (480P/480I)
Y output level 1 Vp-p (75
Ω
)
P
B
output level 0.7 Vp-p (75
Ω
)
P
R
output level 0.7 Vp-p (75
Ω
)
Terminal Pin jack (Y: green, P
B
: blue, P
R
: red) (1 system)
RQT7700(36)5 6/22/04, 8:37 AM 39