7
T
Q
BM
0927
7
USB playback
You can playback MP3 files in the USB device.
Press [INPUT SELECTOR] repeatedly to select “USB”.
Note:
•
Files are defined as tracks and folders are defined as
albums.
•
Tracks must have the extension “.mp3” or “.MP3”.
•
Tracks will not necessarily be played in the order you
recorded them.
•
Some files can fail to work because of the sector size.
Charging a device
Charging starts when a device (rated value: 5 V/1 A) is
connected to the USB port of this unit.
Preparation
Switch on the unit.
Connect a device.
Confirm from the screen of the connected device, etc. to
make sure charging has started.
Note:
•
A cable compatible with your device is required. Use the
cable that comes with your device.
•
Even if you connect a cable compatible with the USB port of
this unit, your device may not be charged. In that case, use
the charger that comes with the device.
•
Do not connect a device with a rated value higher than
5 V/1 A to this unit.
•
To check if charging is complete, look at the screen of the
connected device, etc.
•
Once fully charged, remove the USB cable from the USB
port.
•
Charging stops if auto off function is activated.
External equipment
Preparation
• Disconnect the AC mains lead.
• Switch off all equipment and read the appropriate
operating instructions.
Note:
•
Do not bend cables at sharp angles.
•
Components and cables are sold separately.
•
Switch off the equalizer or reduce the volume of the external
device. High level of input signal can distort the sound.
Using the optical input
You can connect a TV, VCR, DVD player etc., and listen to
the audio through this unit.
1
Connect an external device.
2
Switch on the unit.
3
Press [INPUT SELECTOR] repeatedly to select
“OPT”.
4
Play the external device.
Note:
•
This system supports linear PCM signal.
•
Supported Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz,
88.2 kHz, up to 96 kHz
•
The sound is muted or noise could occur if the signal format
or frequency is not supported.
•
If there are sounds coming from the TV’s speakers,
decrease the volume of the TV to its minimum.
Using the auxiliary input
1
Connect an external device.
Plug type: Ø 3.5 mm stereo
2
Switch on the unit.
3
Press [INPUT SELECTOR] repeatedly to select
“AUX”.
4
Play the external device.
Play
Press [
4
/
9
].
Pause
Press [
4
/
9
].
Press again to continue playback.
Skip
Press [
2
/
3
] or [
5
/
6
] to skip track.
During pause, press and hold [
4
/
9
] to skip
album.
Search
Press and hold [
2
/
3
] or [
5
/
6
].
Repeat
During playback, press and hold [
4
/
9
]
repeatedly to select a repeat mode.
ONE REPEAT: Repeat a single track.
ALL REPEAT: Repeat all tracks.
OFF REPEAT: Cancel repeat.
Rear view
To the compatible device
USB cable (not supplied)
Optical digital audio
cable (supplied)
Rear view
TV (not supplied)
Rear view
Audio cable
(not supplied)
ENGLISH
tmax45.book Page 7 Friday, July 28, 2023 1:47 PM